SEARCHING FOR HOW TO- WIRE TUCK, LIGHT WIRES RE-ROUTE, FUSEPANEL RECLOACTION..EF*
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Aug 2006
Posts: 2,455
Likes: 0
From: Maryland. Dont come lookin
the motor is out of my 91 ef....engine bay was cleaned up and primered as of right now....looking to tuck or hide any wires possbile....as in fuse panel....headlight and corner light wires (THROUGH FENDERS) and anything else...im looking for the write ups..i know theres a million on here jus hard to find....anyone that could help me out with links or suggestions would be nice....thanks
acouple pictures- some old and some new....







acouple pictures- some old and some new....







nice writeup by G0crxG0
https://honda-tech.com/zerothread?id=1719839
https://honda-tech.com/zerothread?id=1719839
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Disco Monkey »</TD></TR><TR><TD CLASS="quote">nice writeup by G0crxG0
https://honda-tech.com/zerothread?id=1719839</TD></TR></TABLE>'
The best and the most complete wire tuck I've seen on HT.
Also, SVOboy sig has a nice write up of how to the driver side wire tuck. IT's similar to the passenger side headlight tuck, but with pictures of the driver side location of stuff. Search for his user name!
https://honda-tech.com/zerothread?id=1719839</TD></TR></TABLE>'
The best and the most complete wire tuck I've seen on HT.
Also, SVOboy sig has a nice write up of how to the driver side wire tuck. IT's similar to the passenger side headlight tuck, but with pictures of the driver side location of stuff. Search for his user name!
In the FAQ there are 2 or 3 wire tuck how to's. I read over them each like 6 times before I started mine. I am 99 percent completed on mine...I will say the key is to label everything!
yeah there not hard jsut, take your time (SOLDER AND HEATSHRINK ALL WIRES) or else they will corrode and you will have a problem!!!
and label everythign!
and label everythign!
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Aug 2006
Posts: 2,455
Likes: 0
From: Maryland. Dont come lookin
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 »</TD></TR><TR><TD CLASS="quote">In the FAQ there are 2 or 3 wire tuck how to's. I read over them each like 6 times before I started mine. I am 99 percent completed on mine...I will say the key is to label everything!</TD></TR></TABLE>
in the FAQ ??? wheres that? i would like to read over them 2 or 3 how to"s as well before i start mine...
thanks alot everyone
in the FAQ ??? wheres that? i would like to read over them 2 or 3 how to"s as well before i start mine...
thanks alot everyone
Its right on the main page of Honda CRX/EF CIVIC forum. You know where your at now...here the link but its right there on the main page, its even a sticky at the top.
https://honda-tech.com/zerothread/1508680
https://honda-tech.com/zerothread/1508680
Thread
Thread Starter
Forum
Replies
Last Post




