well i just bought a t-25 for my homemade turbo setup but i noticed it missing a few things and dont know what they are called

1st whats the piece that bolts up here and has a hose that goes to the intercooler called??where could i get one?



2nd. is it oki for this little wastegate flapper to be out in the open like this?



sorry if these are noob questions but turbo is all new to me and i would greatly appreciate the help and/or advice

 

lol

what part ?

oil drain or the "j pipe"

bottom pic:
That flap means its going to get real loud when your wastegate opens

good luck

 

I dont think I would use that turbo on my riding lawn mower!! They actually fabbed up the "down pipe" directly to the exhaust housing.... didn't this thrown up any red flags when purchacing... I have now seen it all...

 

Wow....umm...the piece you're looking for on the first pic is the compressor outlet elbow and can be bought here http://www.diamondstarmotorspo...shtml

Also like previously stated without that "flapper thingy" or the wastegate valve, routed to the exhaust your car will be extremely loud when the wastegate opens. It also decreases power due to the compressor inlet inhaling those hot burnt gases. I would buy a discharge flange that will route the wastegate gases out the exhaust.