Just as the topic states.. i keep searching but the threads are so old that the pictures are being deleted from them.. so please share kindly.. i plan on building an F22 turbo in my daily driver and just wanted to see what you guys came up with.. thanks!

 

In for pics.

 

Big block d series

 

here is my built f22...

Engine:
F22B2 Engine
85mm Wiseco Pistons
CP Piston Rings
Crower Billet Rods
ACL bearings
ARP Head Studs
XTD Stage 3 Clutch
XTD 11lb Chromoly Flywheel
Rebuilt Stock Head w/ new valves and springs
(A/C removed, P/S removed, All EGR and Emissions stuff removed)

Turbo:
Borg Warner GM-8 Turbo (.60 turbine/.70 Compressor, NO SHAFT PLAY)
SPF Manifold
3" OPEN Downpipe and 1.5" Dumptube (dumptube not pictured)
2.5" Aluminum Intercooler Piping
31x9x3 Turbonetics Intercooler
Tial 50mm Style BOV
Tial 38mm Wastegate
450cc Blue Top INjectors (in the car)
AEM Fuel Rail
Aeromotive Fuel Pressure Regulator
Fast-Turbo Stainless Fuel Lines
Greddy Catch Can
P06 Chipped for Uberdata
Boost, Oil Pressure, and EGT Megan Racing Gauges

VIDEO of how the car performs (ONLY AT 10PSI)
http://video.google.com/videop...hl=en
http://video.google.com/videop...hl=en

PICS of the car...





EDIT: BUMPER FIXED



Modified by rhdune16 at 8:27 AM 2/10/2007

 

nice thanks 4 the pics.. might i add that i own a cb7 (91) accord.. any pics of this setup in this chassis?

 

Are there any more of you out there.

 

I heard you guys can put a h22 head on a f22 block am i right?

 

i can honestly say that you are my hero your car is so dope. One day i will be beating evos great job. I am putting together my turbo kit right now only have a holset h1c tho lol but its a start.

 

yes its alot of work. There is a write up on it one the prelude forum.

 

bump