$5000 - Build your own turbo setup
#3
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: San Diego, CA
Posts: 6,720
Likes: 0
Received 0 Likes
on
0 Posts
Re: $5000 - Build your own turbo setup (SpoolinLS)
Not at all, that's just what you have to work with.
Take fuel and engine management into consideration.
Take fuel and engine management into consideration.
#5
Honda-Tech Member
Join Date: Jan 2001
Location: Lancaster, PA, USA
Posts: 1,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: $5000 - Build your own turbo setup (SpoolinLS)
full-race manifold
PWR water/air intercooler
Precision T64 turbo
4" open downpipe
Tial 46mm wastegate
Tial 50mm BOV
3" aluminum piping
AEM standalone
PWR water/air intercooler
Precision T64 turbo
4" open downpipe
Tial 46mm wastegate
Tial 50mm BOV
3" aluminum piping
AEM standalone
#7
Honda-Tech Member
Join Date: Jan 2001
Location: Lancaster, PA, USA
Posts: 1,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: $5000 - Build your own turbo setup (Underage hybridreams)
of course, half the fun is making it yourself. How can you learn if someone else does it for you.
Trending Topics
#9
Re: $5000 - Build your own turbo setup (boosted3g)
JE pistons-9.5:1 cuz i feel lucky
Eagle Rods
Blockguarded
(800-900)
Rev-hard Manifold
Spearco IC
Blitz BOV
Tial 35mm w/g with .85 lb spring
GT 25/30/35 Turbo, take your pick i guess
Homemade piping
3" downpipe, custom bent 3" piping w/ N1 muffler
(3000 or close)
Hondata s200b
720cc siemens deka's
Greddy Profec B Boost Controller
(1200)
wow, i wish i had money
[Modified by SpoolinLS, 6:30 PM 2/3/2003]
Eagle Rods
Blockguarded
(800-900)
Rev-hard Manifold
Spearco IC
Blitz BOV
Tial 35mm w/g with .85 lb spring
GT 25/30/35 Turbo, take your pick i guess
Homemade piping
3" downpipe, custom bent 3" piping w/ N1 muffler
(3000 or close)
Hondata s200b
720cc siemens deka's
Greddy Profec B Boost Controller
(1200)
wow, i wish i had money
[Modified by SpoolinLS, 6:30 PM 2/3/2003]
#10
Honda-Tech Member
Join Date: Feb 2002
Location: mpls mn
Posts: 2,260
Likes: 0
Received 0 Likes
on
0 Posts
Re: $5000 - Build your own turbo setup (SpoolinLS)
Realistically...
RevHard 2C kit ($3000)
3 inch Thermal ($500)
ACT 6-puck ($500)
550cc RC injectors ($500)
Hondata + Tuning ($1000+)
All the necessary guages ($200-400)
Bam, streetable, and 280+ WHP is not out of the question.
Those numbers are obviously VERY high end. That'd be how I'd do it.
RevHard 2C kit ($3000)
3 inch Thermal ($500)
ACT 6-puck ($500)
550cc RC injectors ($500)
Hondata + Tuning ($1000+)
All the necessary guages ($200-400)
Bam, streetable, and 280+ WHP is not out of the question.
Those numbers are obviously VERY high end. That'd be how I'd do it.
Thread
Thread Starter
Forum
Replies
Last Post
AMR Engineering
Classifieds: Forced Induction
20
10-24-2007 12:59 AM