Would that work ?

 

I am running a usdm b18c1 with a chipped P28 with no problems. Is yours USDM or JDM?

 

jdm motor.

 

unless you're running a single stage intake manifold, the stock p72 will work best.

 

yeah its going to be a blox manifold. prepping it for boost.

 

i have a chipped p28 running my jdm ITR

 

in that case you can use any chipped obd1 ecu

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood &raquo;</TD></TR><TR><TD CLASS="quote">in that case you can use any chipped obd1 ecu</TD></TR></TABLE>

as long as its a vtec ecu

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redDAinteg &raquo;</TD></TR><TR><TD CLASS="quote">

as long as its a vtec ecu </TD></TR></TABLE>

nonvtec ecu's can be converted to vtec. auto ecu's can be converted to manual as well.

 

you just need to run the correct maps on the chip

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood &raquo;</TD></TR><TR><TD CLASS="quote">

nonvtec ecu's can be converted to vtec. auto ecu's can be converted to manual as well. </TD></TR></TABLE>

true story...as long as its obd1

 

so I can run my LS ECU for my b18c as long as its chipped with a basemap to run the motor ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redDAinteg &raquo;</TD></TR><TR><TD CLASS="quote">so I can run my LS ECU for my b18c as long as its chipped with a basemap to run the motor ?</TD></TR></TABLE>

If its obd1 and chipped to run a VTEC motor