K20 in a eg hatch

Reply Subscribe

Thread Tools

Search this Thread

Nov 6, 2006 | 09:29 AM

Boosted_RsxS

Thread Starter

Junior Member

Joined: Sep 2003

Posts: 76

Likes: 0

From: Florida, Pembroke Pines

K20 in a eg hatch

what all do i need other than motor mount swap....like is there any cutting and welding involved and the axles are there any issues.......with the wireing for the eg guages and heater controls and all is there any where i can find these answers,,thanks

Nov 6, 2006 | 05:55 PM

Boosted_RsxS

Thread Starter

Junior Member

Joined: Sep 2003

Posts: 76

Likes: 0

From: Florida, Pembroke Pines

Re: K20 in a eg hatch (02boostedRSX)

bump....

Nov 6, 2006 | 10:10 PM

JDM KID 510

Honda-Tech Member

Joined: Nov 2005

Posts: 4,605

Likes: 0

From: Bay Area [510]

Re: K20 in a eg hatch (02boostedRSX)

* K series motor/tranny/ECU
* K series engine harness
* K series charging harness
* conversion harness
* B/D series coolant temp sensor and fan switch
* fuel rail
* Universal Fuel Pressure regulator
* Custom Fit Fuel lines
* OEM RSX shifter Box or Modified Accord shifter box
* RSX Shifter Cables
* Shifter linkage Clips
* Aftermarket intake
* Aftermarket Header
* Custom Mid Pipe
* Throttle cable for your application
* EP3 pulley and belt (if retaining AC and OEM belt)

Hybrid Racing Is The Way To Go

Nov 9, 2006 | 08:12 PM

Boosted_RsxS

Thread Starter

Junior Member

Joined: Sep 2003

Posts: 76

Likes: 0

From: Florida, Pembroke Pines

Re: K20 in a eg hatch (JDM Kid 510)

nice nice..thanks but one more question...what about the under the dash harness from the eg to the K series computer.... and if you have a reference page on a how to that would be greatly appreciated...