quick 4 wire o2 question
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 600
Likes: 0
From: Newtown, PA, USA
quick 4 wire o2 question
ok so my o2 sensor harness is Yellow (signal), brown, grey, and purple
my o2 sensor is white, grey, black, and white.
now I know this is a stupid question but...what goes to what??
my o2 sensor is white, grey, black, and white.
now I know this is a stupid question but...what goes to what??
Re: quick 4 wire o2 question (Coltmorris)
Brown and Yellow go to the white wires
Gray proooobably goes to the black wire.
Yellow proooobably goes to the gray wire.
I'm 100% sure on the white wires... I could be backwards on that black and gray, if you get an engine code, we'll know to switch them
If you got any instructions with the O2 sensor - 12v+ is the yellow, Gray is the O2 signal wire.
Gray proooobably goes to the black wire.
Yellow proooobably goes to the gray wire.
I'm 100% sure on the white wires... I could be backwards on that black and gray, if you get an engine code, we'll know to switch them
If you got any instructions with the O2 sensor - 12v+ is the yellow, Gray is the O2 signal wire.
Honda-Tech Member
Joined: Nov 2002
Posts: 5,846
Likes: 1
From: San Jose/ Monterey, ca, usa
Re: quick 4 wire o2 question (NikoZai)
first off...
if you have yellow brown grey and purple, those are our colors, and grey is signal not yellow as Peter said.
brown= white
yellow =white
purple= grey
grey=black
if you have yellow brown grey and purple, those are our colors, and grey is signal not yellow as Peter said.
brown= white
yellow =white
purple= grey
grey=black
Thread
Thread Starter
Forum
Replies
Last Post
