9300rpm pt.2 - compression test results
Thread Starter
Joined: Sep 2006
Posts: 299
Likes: 0
From: WestSide, USA
9300rpm pt.2 - compression test results
well i went and bought a compression tester and here where my initial results from 1 to 4.
#1 - 190
#2 - 185
#3 - 183
#4 - 190
I think im ok because they are all within 5-10 psi. Im gonna let my motor cool down a little more and do it again. I might have done it with it too hot. Not sure if that will matter. Also i did it once then i decided to start back at 1 and do it again. During the 3rd crank there was a pop so i was like f this. Dont know what that was but yeah. Kinda weird.
#1 - 190
#2 - 185
#3 - 183
#4 - 190
I think im ok because they are all within 5-10 psi. Im gonna let my motor cool down a little more and do it again. I might have done it with it too hot. Not sure if that will matter. Also i did it once then i decided to start back at 1 and do it again. During the 3rd crank there was a pop so i was like f this. Dont know what that was but yeah. Kinda weird.
Honda-Tech Member
Joined: Mar 2006
Posts: 4,825
Likes: 2
From: Clarksville, TN
Re: (VBPType-S)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VBPType-S »</TD></TR><TR><TD CLASS="quote">1 and 4 are a consistent 190. Everytime i do a test on 2 and 3 they vary from like 183 to 186. I think im ok. Opinions?</TD></TR></TABLE>
Sounds better than I thought it would turn out.
Just don't let that happen again man. It would be a nervous breakdown for me not knowing like that.
Sounds better than I thought it would turn out.
Just don't let that happen again man. It would be a nervous breakdown for me not knowing like that.
Joined: Jun 2006
Posts: 267
Likes: 0
From: Nashville, TN, United States
Re: 9300rpm pt.2 - compression test results (VBPType-S)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VBPType-S »</TD></TR><TR><TD CLASS="quote">well i went and bought a compression tester and here where my initial results from 1 to 4.
#1 - 190
#2 - 185
#3 - 183
#4 - 190
I think im ok because they are all within 5-10 psi. Im gonna let my motor cool down a little more and do it again. I might have done it with it too hot. Not sure if that will matter. Also i did it once then i decided to start back at 1 and do it again. During the 3rd crank there was a pop so i was like f this. Dont know what that was but yeah. Kinda weird.</TD></TR></TABLE>
sounds fine. drive safe
#1 - 190
#2 - 185
#3 - 183
#4 - 190
I think im ok because they are all within 5-10 psi. Im gonna let my motor cool down a little more and do it again. I might have done it with it too hot. Not sure if that will matter. Also i did it once then i decided to start back at 1 and do it again. During the 3rd crank there was a pop so i was like f this. Dont know what that was but yeah. Kinda weird.</TD></TR></TABLE>
sounds fine. drive safe
Honda-Tech Member
Joined: Mar 2006
Posts: 4,825
Likes: 2
From: Clarksville, TN
Re: (VBPType-S)
Just take my advice:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Red.EM2 »</TD></TR><TR><TD CLASS="quote">Next time, just take your foot off the gas and coast to decrease your speed when someone is behind you, they will go around. It works every time. I have gotten a few people down to 20 in a 45 because I don't like people riding my tail.</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Red.EM2 »</TD></TR><TR><TD CLASS="quote">Next time, just take your foot off the gas and coast to decrease your speed when someone is behind you, they will go around. It works every time. I have gotten a few people down to 20 in a 45 because I don't like people riding my tail.</TD></TR></TABLE>
Trending Topics
Joined: May 2006
Posts: 149
Likes: 0
From: Hendersonville, NC, united states
Re: (.Red.EM2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Red.EM2 »</TD></TR><TR><TD CLASS="quote">Just take my advice:
</TD></TR></TABLE>
yea ive done that before
did it the other day cause some old assclown almost hit me while the guy in front of me was turning so i drove 20 mph in a 45
he got pissed and started honking
so i stopped in the middle of the road
acted like i was gonna get out and he stopped and i slowly drove off
i hate people who ride my tail
its so irritating
moral of the story
do be careful when shifting
</TD></TR></TABLE>
yea ive done that before
did it the other day cause some old assclown almost hit me while the guy in front of me was turning so i drove 20 mph in a 45
he got pissed and started honking
so i stopped in the middle of the road
acted like i was gonna get out and he stopped and i slowly drove off
i hate people who ride my tail
its so irritating
moral of the story
do be careful when shifting
Thread
Thread Starter
Forum
Replies
Last Post
