TW/FS- complete b16a-TURBO in 9/10 conditon TUNED-dyno graph make an offer
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 1,484
Likes: 0
From: where temp gets up to 120deg, ca, usa
Like the title say I have
B16a 50ish k miles
Gsr tranny 40kish miles
Act 6 spuck unsprung
Supertech valve spring
Jg retainer
Type-r 96-98spec
(New water, oil pump, timing belt, oil pan gasket,head gasket, oem stock head stud,
All the mounts with polyurethane inserts
Skunk2 manifold
Precision 440cc injector
Gsr tb
B&m fpr
Xs power t3/to4e (iknow
) 50cold-63hot
2.5 charge pipe
Tuner toys oil feed (with custom fab restrictor valve)
Custom fab return line
Xs power equal length manifold (braced been running for 4k w/o cracking problem
)
Tial wastegate 7psi
Egay intercooler (exact intercooler for eg)
Hks ssqv blow off valve
2.5 dp
Ngk blue spark plug wire/ngk spark plug
Msd cap with blaster 3
P05 ecu w/vtec conv. Crome
Tuned by bubba (do it dyno in signal hill)
Change oil with only full synthetic 10/30
Every 3k miles and fram filter
EDIT: also with greddy turbo timer and auto meter gauge eg gauge pod if u have an eg
Shoot me an offer I know there s some people out there that want and instant power that can beat k20r,type r like nothing
Reason I'm selling this is bc I want a new motorcycle right now I have an old 00gsxr600 and just love riding with my friend
Hopefully I get what I want toget out of this setup
U know how's it cost and know how hard it is to setup and low quality turbo that last long
U can come over and test drive it (u break it u buy it) and I tell u with the oem muffler this baby pull like crazy
Email me or aim check my sig cuz I can't check pm(sidekick2) or if u wanna pm me post up here that u did make sure leave ur number so I can call u back
Thanks a lot let get this going
B16a 50ish k miles
Gsr tranny 40kish miles
Act 6 spuck unsprung
Supertech valve spring
Jg retainer
Type-r 96-98spec
(New water, oil pump, timing belt, oil pan gasket,head gasket, oem stock head stud,
All the mounts with polyurethane inserts
Skunk2 manifold
Precision 440cc injector
Gsr tb
B&m fpr
Xs power t3/to4e (iknow
) 50cold-63hot2.5 charge pipe
Tuner toys oil feed (with custom fab restrictor valve)
Custom fab return line
Xs power equal length manifold (braced been running for 4k w/o cracking problem
)Tial wastegate 7psi
Egay intercooler (exact intercooler for eg)
Hks ssqv blow off valve
2.5 dp
Ngk blue spark plug wire/ngk spark plug
Msd cap with blaster 3
P05 ecu w/vtec conv. Crome
Tuned by bubba (do it dyno in signal hill)
Change oil with only full synthetic 10/30
Every 3k miles and fram filter
EDIT: also with greddy turbo timer and auto meter gauge eg gauge pod if u have an eg
Shoot me an offer I know there s some people out there that want and instant power that can beat k20r,type r like nothing
Reason I'm selling this is bc I want a new motorcycle right now I have an old 00gsxr600 and just love riding with my friend
Hopefully I get what I want toget out of this setup
U know how's it cost and know how hard it is to setup and low quality turbo that last long
U can come over and test drive it (u break it u buy it) and I tell u with the oem muffler this baby pull like crazy
Email me or aim check my sig cuz I can't check pm(sidekick2) or if u wanna pm me post up here that u did make sure leave ur number so I can call u back
Thanks a lot let get this going
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 1,484
Likes: 0
From: where temp gets up to 120deg, ca, usa
Pm me ur how much u wanna spend and ur number so I can call u I can't answer vice versa cuz I'm on my sidekick2 all the time
So post here that u pm me so I know then ill check it
Thanks a lot
Keep shooting me offer
So post here that u pm me so I know then ill check it
Thanks a lot
Keep shooting me offer
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 1,484
Likes: 0
From: where temp gets up to 120deg, ca, usa
I'm not parting out I'm selling it complete
If u want a block I have a b18a1 complete except flywheel 200lmk
If u want a block I have a b18a1 complete except flywheel 200lmk
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepointsixvtecturbo »</TD></TR><TR><TD CLASS="quote">240whp 165wtq @ 6-7psi on 91octane</TD></TR></TABLE>
Nice
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepointsixvtecturbo »</TD></TR><TR><TD CLASS="quote">I'm not parting out I'm selling it complete
If u want a block I have a b18a1 complete except flywheel 200lmk</TD></TR></TABLE>
No I have a ls block already just wanted to see if you would sell the b16 alone.
Nice
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepointsixvtecturbo »</TD></TR><TR><TD CLASS="quote">I'm not parting out I'm selling it complete
If u want a block I have a b18a1 complete except flywheel 200lmk</TD></TR></TABLE>
No I have a ls block already just wanted to see if you would sell the b16 alone.
Thread
Thread Starter
Forum
Replies
Last Post




