I need to know how to wire the distributer, crank sensor, and the alternator. I have a 00 civic ex and I am putting in a 97 B18c. If anybody can help I would be very greatful. Thank you

 

What year is the b18c? Sounds like you have an obd1 motor.

 

The B18c is from a 97 gsr. The injectors plugged in fine

 

the alternator should plug in as well if its obd2, same with the crank sensor, should be on the block and your harness.

 

When my buddy did his swap he had to only use 2 of the wires on his crank sensor. Also B and D series alternators are different.

 

I say, fugga OBD 2. Switch to OBD 1 and don't worry about the crank fluxuation sensore.

On the distributor, you're just gonna have to open it up and match the colors on the wires.

 

Welp, here is what you need. Obd2 alternator(b-series. i know they are different.), obd2 b-series vtec distributor, and plug in the ckf sensor into your ex harness. Havent you asked this question before? Because I have answered it a bunch of times.

 

swap info listed here:
http://www.jspectuning.com/6gen/