I have done plenty of searches on here and couldnt find anything about my question...i bought a GE sandwich plate Bran new but it only had two plugs on it , one for the ls/vtec and one for my oil feed fitting...Well I need one more port for my oil pressure gauge and I was just going to T it off the sandwich plate but I was told not to do that for oil pressure reasons...

My question is Does GE sell one plate with 2 1/8th fitting in it or am I going to have to sell it and get another one like the AC Autotechnic or the Greddy one....

Please everyone give me your feedback....

-George

 

Go to goldeneaglemfg.com they sell an adapter which will let you run a second 1/8th npt fitting. (3/4 Boss to 1/8 Npt)

 

John is the MAN!!!!!


Thanks

 

I need to Find one Locally so I can get the car running!!

 

find a local hydraulic shop

 

You can always run a T fitting at the oil pressure sensor position, this is where you had to run a feed line for a turbo or Lsvtec feed back in the day(Before honda sandwich plates). That's what I did, I used the GE lsvtec kit, and used the oil pressure sensor for my turbo feed, and the second port on the GE is not used at the moment.

 

ill try some local hydro shops tom if not ill order from GE