how do i pull out the studs that hold on the intake manifold? Is there an EASY way to do it? I have 3 bent ones, one of which definately needs to be replaced. I bought a head today and the guy i got it from said they got bent when he had it shipped to him.

 

Spray them with some PB Blaster, then get some vice grips, clamp down, and turn

 

is it a reverse thread by any chance?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by InvaderTrax &raquo;</TD></TR><TR><TD CLASS="quote">Spray them with some PB Blaster, then get some vice grips, clamp down, and turn</TD></TR></TABLE>

noooo dont do that unless you want to ruin all of them, you can tighten two nuts on there to each other, then turn them off like a normal human being

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 &raquo;</TD></TR><TR><TD CLASS="quote">

noooo dont do that unless you want to ruin all of them, you can tighten two nuts on there to each other, then turn them off like a normal human being</TD></TR></TABLE>

thank you!!

 

I snapped mine!!! It sucks i gotta pull the manifold off AGAIN to fix the problem