Driving 91 honda accord ex manual stock, my exhaust had suddenly broken right where the cat hooks on to the rest of the piping that leads to the rear. I searched the archived stuff and couldnt find much. Maybe some one out there has had a similar problem. Anyway I was thininking of shaping some aluminum sheet metal to make some sort of fitting and was wondering if anyone had an opinion on this.

 

same thing happened to my 91, also a 5spd ex, and we just used a tin can until i had time to get it fixed

 

oh man, so much simpler thanks I always have to do stuff the hard way lol

 

btw will the can have to fix real snug or can you kind of just jam it in there?

 

why bother to fingerfwak it when you can have it welded for like 20 bucks?

they sell exhasut patch kit at autozone but it's pretty ghetto looking also

 

really, it only costs twenty bucks? Ill have to check but it sounds too low....

 

my stock exhaust rusted out from cat to muffler and we replaced it all for about 200bucks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95lxcoupe &raquo;</TD></TR><TR><TD CLASS="quote">my stock exhaust rusted out from cat to muffler and we replaced it all for about 200bucks.</TD></TR></TABLE>

he has a crack, you need a whole catback.

200 sounds about right if they weld you up a new pipe and new resonator/muffler

and to the original poster, you still have all the pipe/resonator/muffler, right?

 

Yeah everything is still there but 200 is a long way from twenty, I think ill go with the tin can for now

 

we took my car to by-state and they put a new resinator on it and welded it all back up for $50 bucks. that was a few months ago and i havn't had any problems with it since

 

Get it welded. Stop rigging up your car.

It will cost you 20-30$. Ever actually go to a muffler shop and ask?