looking for pics on how you guys have rigged up the IC piping to fit on the dsm turbo J pipe.

 

I usually use a 2inch to 2.5inch adapter coupler to use it with intercooler pipping.

 

ya i know i need a 2.75 to 2" adapter coupler (wich will be very hard to find)
but im wondering how im going to fab the piping to fit at the J pipes angle.

 

That's on my TD04 14G.

edit: Those pics suck.

http://www.cardomain.com/ride/2295988

The top two pictures will show you what I did.

 

cool thanks but my small16g is on the drivers side. and the flange for the Jpipe sits like rightby the valve cover, so im going to need like a 180degree pipe or something..
any other pics ppl?

 

You can always take off the two bolts on the J pipe and turn it the other way.

Or you could cut the J pipe and have it welded in the direction you want it.

 

Check in the forced induction section, they prolly have a lot more people that could answer that question.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Everyones Hero &raquo;</TD></TR><TR><TD CLASS="quote">
Or you could cut the J pipe and have it welded in the direction you want it.</TD></TR></TABLE> awwe yes, i didnt think about that thats what most likely will have to happen. thanks