butterfly on gsr will not open, so new manifold..
Thread Starter
Honda-Tech Member
Joined: Nov 2005
Posts: 598
Likes: 0
From: USA
butterfly on gsr will not open, so new manifold..
so i been having trouble trying to get my manifold butterfly to open on my gsr so a buddy suggested buying an aftermarket so i need opinion on some of the one i already know about not really high on cash so set limit at $250.. what do you guys think about:
skunk2 intake manifold:
blox intake manifold:
revhard intake manifold:
vitorX intake manifold:
please give me opinions and ratings for best performance thanks in advance..
skunk2 intake manifold:
blox intake manifold:
revhard intake manifold:
vitorX intake manifold:
please give me opinions and ratings for best performance thanks in advance..
Honda-Tech Member
Joined: Jul 2005
Posts: 2,571
Likes: 1
From: Vanier, On, Canada
Re: butterfly on gsr will not open, so new manifold.. (Project_DX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Project_DX »</TD></TR><TR><TD CLASS="quote">do you mean the butterfly in your TB</TD></TR></TABLE>
no the GSR has secondary butterflies in the intake manifold. long runners for loew-end torque and short runners for high-end breathing
no the GSR has secondary butterflies in the intake manifold. long runners for loew-end torque and short runners for high-end breathing
Honda-Tech Member
Joined: Aug 2002
Posts: 2,826
Likes: 1
From: Columbus, Ohio
Re: butterfly on gsr will not open, so new manifold.. (hatch-E-vanish)
why not just buy a new Throttle Body. if you buy a new manifold your going to put the busted TB back on and have the same problem
platinum
platinum
Unceasing Measure
Joined: Feb 2002
Posts: 13,088
Likes: 6
From: Columbus Ohio
Re: butterfly on gsr will not open, so new manifold.. (Project_DX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Project_DX »</TD></TR><TR><TD CLASS="quote">do you mean the butterfly in your TB</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by platinum00 »</TD></TR><TR><TD CLASS="quote">why not just buy a new Throttle Body. if you buy a new manifold your going to put the busted TB back on and have the same problem
platinum</TD></TR></TABLE>
...How can you be members of this site for any amount of time and not know wtf this guy is talking about?
Anyhow. The Blox manifold is the best bet for cost effectiveness of the four mentioned. It's cheap and it's better than the Skunk2.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by platinum00 »</TD></TR><TR><TD CLASS="quote">why not just buy a new Throttle Body. if you buy a new manifold your going to put the busted TB back on and have the same problem
platinum</TD></TR></TABLE>
...How can you be members of this site for any amount of time and not know wtf this guy is talking about?
Anyhow. The Blox manifold is the best bet for cost effectiveness of the four mentioned. It's cheap and it's better than the Skunk2.
Trending Topics
Joined: Jul 2005
Posts: 224
Likes: 0
From: Califonia, PA, usa
Re: butterfly on gsr will not open, so new manifold.. (Archidictus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus »</TD></TR><TR><TD CLASS="quote">...How can you be members of this site for any amount of time and not know wtf this guy is talking about?
</TD></TR></TABLE>
oh sorry master of all knowing knowlagable things to know. if you would have read my post right before yours you would and seen that i had already admitted defeat and that in deed i didn't know, and now i do. then i suggested Blox
</TD></TR></TABLE>
oh sorry master of all knowing knowlagable things to know. if you would have read my post right before yours you would and seen that i had already admitted defeat and that in deed i didn't know, and now i do. then i suggested Blox
Unceasing Measure
Joined: Feb 2002
Posts: 13,088
Likes: 6
From: Columbus Ohio
Re: butterfly on gsr will not open, so new manifold.. (Project_DX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Project_DX »</TD></TR><TR><TD CLASS="quote">master of all knowing knowlagable things to know.</TD></TR></TABLE>
I'm requesting that a mod make that my title
I'd spell it correctly, but still, that's rad.
I'm requesting that a mod make that my title
I'd spell it correctly, but still, that's rad.
Honda-Tech Member
Joined: Jan 2006
Posts: 10,443
Likes: 2
From: Rochester, New York -> Santa Clara, CA
If I could add one to the list I'm a pretty big fan of the edelbrock IM's...have u looked into them?
If not, out of those 4 I'd have to go with 1-blox, 2-skunk2, 3-revhard, 4-vitorX
If not, out of those 4 I'd have to go with 1-blox, 2-skunk2, 3-revhard, 4-vitorX
Honda-Tech Member
Joined: Oct 2005
Posts: 341
Likes: 0
From: New Haven, CT, United States
Re: (Syndacate)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Syndacate »</TD></TR><TR><TD CLASS="quote">If I could add one to the list I'm a pretty big fan of the edelbrock IM's...have u looked into them?
If not, out of those 4 I'd have to go with 1-blox, 2-skunk2, 3-revhard, 4-vitorX</TD></TR></TABLE>
i liked how he said he a big fan of edelbrok but then but the VictorX #4
If not, out of those 4 I'd have to go with 1-blox, 2-skunk2, 3-revhard, 4-vitorX</TD></TR></TABLE>
i liked how he said he a big fan of edelbrok but then but the VictorX #4
Thread
Thread Starter
Forum
Replies
Last Post
DOHCgarage919
Acura Integra
5
Dec 27, 2006 08:40 PM
