anyone know where the hell I can get one? Its for a drain line for a catch can setup. the can already has a drain plug with that thread size, but I want to attach a hose to it and route it out the bottom of the car (easier to empty) or back into the crank case, but I cannot find a hose barb fitting for it. Is there a similar non-metric fitting that might work? Besides Earls, Anplumbing.com, any other sites you guys know of?

 

Try http://www.mcmaster.com/

 

A 1/4" NPT fitting is pretty close (though obviously not exact), and can be found at most hardware stores.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KayOs &raquo;</TD></TR><TR><TD CLASS="quote">Try http://www.mcmaster.com/ </TD></TR></TABLE>

BOOOOO!!!!!!!! http://www.fastenal.com is where its at.

only predjudice because its my job lol

 

part# 69921 1/4x 1\4 male hose barb. you can get the 1/4npt pipe tap and make it fit perfect if you want to part#0326934.

I can give you my employee discount on them if you want.

 

I knew there was a size that was close to 14mm that would work! I was able to make it work with some fittings I had laying around. Thanks!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXtacy2006 &raquo;</TD></TR><TR><TD CLASS="quote">

BOOOOO!!!!!!!! http://www.fastenal.com is where its at.

only predjudice because its my job lol</TD></TR></TABLE>