I switched to obd 1 and uberdata but I keep showing a code 9 . looked it up and it says its the cylinder sensor. Ive been to honda and no one knows what that is .Tried a other distrutor, checked all the wires. any ideas?
thanks mike

Modified by canadamike at 1:47 AM 7/29/2006


Modified by canadamike at 1:52 AM 7/29/2006

 

what jumper harness are you using?

 

I have a evo garage harness.Tried myy friends and got the same results, we checked all the wiring twice and changed the injectors, tested the distrubter. every thing seem to be fine. when its cold it runs great as soon as it warms up it idles rough and surges or stalls when i slow down or put the clutch in. this has us all stumped the engine light flashes 9 times (9 CYP - cylinder sensor ) I don't know what they mean by cylinder sensor .
thanks mike

 

If you tried a known good distributor and it did not fix it is sounds like something is not wired correctly.

 

I got a new distributer when I swithed over I'll exchange it and see if that make a differance.

 

I replaced the dist. still flashing a code 9

 

Check your wires again, check for continuity from the distributor down to your ecu pins.