I did some search but couldn't come up with any Real facts, i'm not going to spend my money on wrong parts like i did in the past. so please post answers with experience.

I have a jdm b16 head that's been port & polished with a 3 angle valve job done and a .10 mill I already bought the prelude lost motion assembly, and OEM valve seals.

Do i need new valve stems if so which do you recommend?

Do i need to buy oversized valves or can i go with stock size?

What kind of valvetrain are you guy's running for a JDM B16 head & a JDM gsr bottom end with JDM B16B type r pistons?

Which headgasket do i use with a .10 mill ?

Can i use a type r water pump, if so which timing belt?

Sorry for all the questions, at least it's 1 post

 

evening bump, need some help here please.

 

n1

 

yes b series vtec water pumps are the same, the type r and gsr timing belts are the same also.

 

Ok thanks guess i got 1 question out the way n1 else

 

https://honda-tech.com/zerothread?id=737028

 

so if i have jdm b16b pistons with a 10 mill and a 2 layer mugen/spoon headgasket , what should my compression be?