there any write ups on removing a head with pictures

 

All I know is you have to...


1. Remove valve cover
2. Remove timing belt(or take it off the pulleys and lay it to the side).
3. Remove all Hoses & wiring that connect to the throttle body, and various other places.
4. You need to pull your cams to get to the bolts Otherwise remove all the bolts.
5. Follow The correct loosening & tightening sequence

And if you need more help you can go here and get a copy of the helms manual, this pay help you in the future too http://www.hondahookup.com/manuals/