is this real? *video*
Thread Starter
Junior Member
Joined: Jun 2006
Posts: 665
Likes: 0
From: somewhere in WA
is this real? *video*
Thread Starter
Junior Member
Joined: Jun 2006
Posts: 665
Likes: 0
From: somewhere in WA
Re: is this real? *video* (DeadEnd9009)
thanks u answered my question.... lol me and a friend dont know enough about b16 motors to make that judgment. even tho he has one in his hatch..
Honda-Tech Member
Joined: Sep 2005
Posts: 6,922
Likes: 1
From: CA, United States
Re: is this real? *video* (iwantspeed)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iwantspeed »</TD></TR><TR><TD CLASS="quote">thanks u answered my question.... lol me and a friend dont know enough about b16 motors to make that judgment. even tho he has one in his hatch..
</TD></TR></TABLE>
that is what too much boost...you'll be lucky to run that motor that hard with out blowing with 10psi
</TD></TR></TABLE>that is what too much boost...you'll be lucky to run that motor that hard with out blowing with 10psi
Honda-Tech Member
Joined: Sep 2005
Posts: 3,003
Likes: 0
Re: is this real? *video* (iwantspeed)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iwantspeed »</TD></TR><TR><TD CLASS="quote">thanks u answered my question.... lol me and a friend dont know enough about b16 motors to make that judgment. even tho he has one in his hatch..
</TD></TR></TABLE>
its just that a aluminium block cannot take that kind of pressure. Your need to get the engine sleeved and basically built to take that kind of pressure and power.
</TD></TR></TABLE>its just that a aluminium block cannot take that kind of pressure. Your need to get the engine sleeved and basically built to take that kind of pressure and power.
lulz
Joined: May 2005
Posts: 3,671
Likes: 0
From: In Tha Sticks, WI, USA
Re: is this real? *video* (DeadEnd9009)
i know a factory sleeved d16 can handle 26psi dont know how long but full race pulled it off but they had the motor built up except block and sleeves. so i figure a b16 would be around there but not completley stock. and for you ******* flamers the kid and a decent question he wanted answered no need to be dicks about it just because your on all mighty honda-tech and other people did it to you.
Joined: Nov 2002
Posts: 294
Likes: 1
From: Northeast, Bama, Yall
Re: is this real? *video* (92'BluV-tecHatch)
"It took 30lbs of boost to make 460whp on a stock sleeved d-series. I guess the rumor that stock sleeved d-series blocks not being able to take high horsepower is false. " -- Evans Tuning
Tuning = difference between boom and zoom.
Tuning = difference between boom and zoom.
Trending Topics
Honda-Tech Member
Joined: Jan 2006
Posts: 10,443
Likes: 2
From: Rochester, New York -> Santa Clara, CA
iono, I got a hard time believing a completely stock B16 can hold onto 37lbs of boost on WOT... Iono, seeing is believing and a video isn't seeing because there's no way to truely tell..
Maybe what they meant by stock B16 is it wasn't bored or anything, but might have reinforced rods - definately tuned, u heard it riding the rev limiter and that wasn't a factory rev limiter... I seriously have no idea how to tune to 37lbs of boost on a stock engine, that's some insane tuning, I have no idea how to tune like that...
As far as that quote goes...iono man, I wish there were some high end performance shops around here so I could run a tune of like 10lbs w/o throwing a rod - but chances are too null because there aren't any shops like that around here...
Maybe what they meant by stock B16 is it wasn't bored or anything, but might have reinforced rods - definately tuned, u heard it riding the rev limiter and that wasn't a factory rev limiter... I seriously have no idea how to tune to 37lbs of boost on a stock engine, that's some insane tuning, I have no idea how to tune like that...
As far as that quote goes...iono man, I wish there were some high end performance shops around here so I could run a tune of like 10lbs w/o throwing a rod - but chances are too null because there aren't any shops like that around here...
Junior Member
Joined: Oct 2001
Posts: 657
Likes: 0
From: Arlington, TX, USA
Re: (gabebauman)
i almost sure this is a vid of randys car...heres the specs on this car.
https://honda-tech.com/zerothread?id=1620401
you can probably get a hold of him or philip for more info on this car. the car is absolutely nuts and is amazing to see on the track...i think their h-t names are randys and philipwight...much props
https://honda-tech.com/zerothread?id=1620401
you can probably get a hold of him or philip for more info on this car. the car is absolutely nuts and is amazing to see on the track...i think their h-t names are randys and philipwight...much props
Member
Joined: May 2005
Posts: 1,326
Likes: 0
From: Macon, GA, U.S.
Re: is this real? *video* (92'BluV-tecHatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92’BluV-tecHatch »</TD></TR><TR><TD CLASS="quote"> and for you ******* flamers the kid and a decent question he wanted answered no need to be dicks about it just because your on all mighty honda-tech and other people did it to you.</TD></TR></TABLE>
WTF r u talking about?? No one flamed him.
WTF r u talking about?? No one flamed him.
Honda-Tech Member
Joined: Jan 2006
Posts: 897
Likes: 0
From: South California
in the forced induction forum, i read something like this: how many lbs of boost does not blow engines. it's the amount of power it can handle. i stopped reading after i decided to DOHC instead of SOHC boost.
and i believe 10lbs untuned vs. 10lbs tuned yield different amounts of power.
anyway, i'd only put down 30+ lbs (tuned) on stock sleeves if i was racing a ferrari for a pink slip. good luck driving that **** the next day.
and i believe 10lbs untuned vs. 10lbs tuned yield different amounts of power.
anyway, i'd only put down 30+ lbs (tuned) on stock sleeves if i was racing a ferrari for a pink slip. good luck driving that **** the next day.
Member
Joined: Mar 2004
Posts: 4,982
Likes: 8
From: Somewhere to anywhere, Ca
Re: (the soL that could)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by the soL that could »</TD></TR><TR><TD CLASS="quote">in the forced induction forum, i read something like this: how many lbs of boost does not blow engines. it's the amount of power it can handle. i stopped reading after i decided to DOHC instead of SOHC boost.
and i believe 10lbs untuned vs. 10lbs tuned yield different amounts of power.
anyway, i'd only put down 30+ lbs (tuned) on stock sleeves if i was racing a ferrari for a pink slip. good luck driving that **** the next day.</TD></TR></TABLE>
What? Who said anything about racing a ferrari for pink slips?
No matter what that car was running (boost wise) it was not a stock b16. A little over a 10 second run has to be on a built (semi built) engine.
and i believe 10lbs untuned vs. 10lbs tuned yield different amounts of power.
anyway, i'd only put down 30+ lbs (tuned) on stock sleeves if i was racing a ferrari for a pink slip. good luck driving that **** the next day.</TD></TR></TABLE>
What? Who said anything about racing a ferrari for pink slips?
No matter what that car was running (boost wise) it was not a stock b16. A little over a 10 second run has to be on a built (semi built) engine.
Honda-Tech Member
Joined: Aug 2005
Posts: 2,292
Likes: 2
From: I like the tuna here
Re: is this real? *video* (92'BluV-tecHatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92’BluV-tecHatch »</TD></TR><TR><TD CLASS="quote">and for you ******* flamers the kid and a decent question he wanted answered no need to be dicks about it just because your on all mighty honda-tech and other people did it to you.</TD></TR></TABLE>
wtf are you talking about?
wtf are you talking about?
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
Re: (SOHC4life 96)
apparently most people on this site only stick in one forum section. that is a stock b16. it probably wont last long, but yes, its possible.
Honda-Tech Member
Joined: Jan 2006
Posts: 897
Likes: 0
From: South California
Re: (SOHC4life 96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC4life 96 »</TD></TR><TR><TD CLASS="quote">
What? Who said anything about racing a ferrari for pink slips?
No matter what that car was running (boost wise) it was not a stock b16. A little over a 10 second run has to be on a built (semi built) engine.</TD></TR></TABLE>
relax ... that was a joke. just like this thread.
What? Who said anything about racing a ferrari for pink slips?
No matter what that car was running (boost wise) it was not a stock b16. A little over a 10 second run has to be on a built (semi built) engine.</TD></TR></TABLE>
relax ... that was a joke. just like this thread.
Honda-Tech Member
Joined: Jun 2004
Posts: 10,812
Likes: 0
From: So Cal
Re: is this real? *video* (civicminded92)
Since my post was deleted, I'll add what I think. 
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by the soL that could »</TD></TR><TR><TD CLASS="quote">in the forced induction forum, i read something like this: how many lbs of boost does not blow engines. it's the amount of power it can handle. i stopped reading after i decided to DOHC instead of SOHC boost.
and i believe 10lbs untuned vs. 10lbs tuned yield different amounts of power.
anyway, i'd only put down 30+ lbs (tuned) on stock sleeves if i was racing a ferrari for a pink slip. good luck driving that **** the next day.</TD></TR></TABLE>
very true because of <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicminded92 »</TD></TR><TR><TD CLASS="quote">"It took 30lbs of boost to make 460whp on a stock sleeved d-series. I guess the rumor that stock sleeved d-series blocks not being able to take high horsepower is false. " -- Evans Tuning </TD></TR></TABLE>
tuning
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by the soL that could »</TD></TR><TR><TD CLASS="quote">in the forced induction forum, i read something like this: how many lbs of boost does not blow engines. it's the amount of power it can handle. i stopped reading after i decided to DOHC instead of SOHC boost.and i believe 10lbs untuned vs. 10lbs tuned yield different amounts of power.
anyway, i'd only put down 30+ lbs (tuned) on stock sleeves if i was racing a ferrari for a pink slip. good luck driving that **** the next day.</TD></TR></TABLE>
very true because of <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicminded92 »</TD></TR><TR><TD CLASS="quote">"It took 30lbs of boost to make 460whp on a stock sleeved d-series. I guess the rumor that stock sleeved d-series blocks not being able to take high horsepower is false. " -- Evans Tuning </TD></TR></TABLE>
tuning
Thread
Thread Starter
Forum
Replies
Last Post
Metal Typhoon
Forced Induction
13
Jun 18, 2006 09:57 AM
Dirttylicous
Honda CRX / EF Civic (1988 - 1991)
15
May 24, 2004 07:24 PM