well due to my head studs not being torked on right when my motor was regasketed b4 it was sent to me, i believe i blew the head gasket so i need a new one.. just wondering do i need to get the gasket or can i get one from a newer one like an b16a2.. same for the valve cover what one should i get? alsoo the reason why i stoped the car when this happen today was b/c i hered a noise thats comeing from the timeing belt...it sounded like it was rubbing the cover so i pulled over to see the head gasket leaking and then pulled the cover off and noticed there was alot of play in the timeing belt... do u think its the wrong one or is the tensioner to lose and or broken....

 

punctuation would be nice...

 

luckily he asked for a grammar check

 

sorry guys, i was in a hurry. what do u think about my problem? what gaskets do i need

 

and does any one know the tork specs, for when i put the head back on after i replace the gaskets?

 

You can use any b16 headgasket,Gsr,type-r,all will work..

For valve cover gasket and o-ring i used one for the b16a3 delsol vtec

What headstuds do you have ?

 

head studs should be stock as fare as i know


Modified by uberhaulin at 12:18 PM 7/3/2006

 

Torque specs:
https://honda-tech.com/zerothread?id=953151
B16a1 parts list:
https://honda-tech.com/zerothread?id=1024595
both of these links are found in FAQ section..

Google "VTEC supplement" and download the file...

 

thanks a ton !!!!