I need to get a new deck for my car. Are most stereos a standar size or should I measure eveerything before going out and getting one. The one i have now is clarica, so I figured any new one would fit right. Im new at this so dont laugh.

Thanks
Cathy

 

i have a friend that has a 00 tiburon, his alpine fit right in, u first u need to take off the plastic piece thats around the shifter(if its an auto, im assuming its the same for manual also) then the solid dash piece thats over the rest of the cd player(its hard to get off, both pieces). then there are screws holding everything in.


im not sure if its exactly the same style tho as ur 03

 

you need a SCOSCHE dash kit number Hy1604b
and wire harness Hy04b

both should run you about $20-25
good luck
Kay

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maccat &raquo;</TD></TR><TR><TD CLASS="quote">I need to get a new deck for my car. Are most stereos a standar size or should I measure eveerything before going out and getting one. The one i have now is clarica, so I figured any new one would fit right. Im new at this so dont laugh.

Thanks
Cathy</TD></TR></TABLE> Yes all "din" HUs are the same size, You can use the same mounting system and wiring adapter as was used on the "clarica", [whatever that is, maybe a Clarion]. 94

 

Yeah the deck i have now is a clarion, just a generic one that came with teh car

One thing I dont get is the wiring for the car, Im pretty sure this car comes stock with a amplifier correct? Will that cause me any trouble with wiring

I know everyone says to buy the wiring harnesses but wil it be needed?

Looking at getting a alpine/panasonic/sony type of deck
Nothing expensive

Abut getting the dash trim off so I can get the cd player out, how do I go about doing that? Feels like everythings gonna break when you try and pull the pieces off

thanks guys

 

Here is the wiring... http://www.the12volt.com/insta...13069, if you don't want to spring for a new adapt. harness, use the one on the Clarion, [if you can] cut the adapt. not the cars harness.

 

Done Finished Installed

I cut her aftermarket harness and mated it to the cd player THAT I FREELY DONATED TO HER, installed and looking sexy

your welcome cathy

 

Thank you once again for the stereo and the hard work you put into it. Very smart guy you are.

 

There are no words....


Reported.

 

Shes my girlfriend

Yes, Id like to have relations with her

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by W O T &raquo;</TD></TR><TR><TD CLASS="quote">Done Finished Installed

I cut her aftermarket harness and mated it to the cd player THAT I FREELY DONATED TO HER, installed and looking sexy

your welcome cathy</TD></TR></TABLE>

Wtf? Is this some crazy installer shop talk?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by W O T &raquo;</TD></TR><TR><TD CLASS="quote">Shes my girlfriend

Yes, Id like to have relations with her</TD></TR></TABLE>

 

See what happenes when you are nice to people who offer to fix stereos for ya... Just kidding. We are dating sorry for the yuk talk.
Relations? *** on bu you can do betteer than that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">Shes my girlfriend
Yes, Id like to have relations with her
</TD></TR></TABLE>

No one cares. This is not the forum (nor the site) for that...