FS: 1990 EF9 Hatch B18B Turbo 8.7 1/8th Nebraska
Thread Starter
Honda-Tech Member
iTrader: (4)
Joined: Dec 2004
Posts: 4,344
Likes: 1
From: Bellevue/NE, Dallas/TX, USA
FS: 1990 EF9 Hatch B18B Turbo 8.7 1/8th Nebraska
Testing Waters
Contact: (402) 201-7077
Email: Cryin3y3s@aol.com
AIM: Cryin3y3s@aol.com
90 civic with a 95 B18B1 motor 91 teg tranny
2.5in intercooler piping
JRC intercooler
T- Bolt clamps
1G DSM BOV
1G DSM 450cc Injectors
3in downpipe
its dyno tuned safely for 10psi
it needs a little street tuning
has a little hicup going from VAC to BOOST
its current 1/8th mile best time is a 8.7@83mph 2.160ft with drag radials
it put down 236hp/203tq on sublimes dyno
the clutch slips a little when cold.... but once its warmed up it grabs just fine.
its a stock clutch so i would recomend upgrading it
theres a little grind going into 3rd but only when you get on it
Skunk 2 Lowering springs give it a nice drop.
on the outside its missing driver sidelight and door quarter mouldings
needs a couple plastic interior pieces
has a CRX Dash
rear disk swap
has a JKMotorsport traction bar https://www163.safesecureweb.c...x?c=1
polyurethane suspension bushings
NEW windshield
heres some new and old pics.. also the dyno chart
Modified by 4NLINE UNLIMITED at 11:48 PM 6/7/2006
Contact: (402) 201-7077
Email: Cryin3y3s@aol.com
AIM: Cryin3y3s@aol.com
90 civic with a 95 B18B1 motor 91 teg tranny
2.5in intercooler piping
JRC intercooler
T- Bolt clamps
1G DSM BOV
1G DSM 450cc Injectors
3in downpipe
its dyno tuned safely for 10psi
it needs a little street tuning
has a little hicup going from VAC to BOOST
its current 1/8th mile best time is a 8.7@83mph 2.160ft with drag radials
it put down 236hp/203tq on sublimes dyno
the clutch slips a little when cold.... but once its warmed up it grabs just fine.
its a stock clutch so i would recomend upgrading it
theres a little grind going into 3rd but only when you get on it
Skunk 2 Lowering springs give it a nice drop.
on the outside its missing driver sidelight and door quarter mouldings
needs a couple plastic interior pieces
has a CRX Dash
rear disk swap
has a JKMotorsport traction bar https://www163.safesecureweb.c...x?c=1
polyurethane suspension bushings
NEW windshield
heres some new and old pics.. also the dyno chart
Modified by 4NLINE UNLIMITED at 11:48 PM 6/7/2006
Thread Starter
Honda-Tech Member
iTrader: (4)
Joined: Dec 2004
Posts: 4,344
Likes: 1
From: Bellevue/NE, Dallas/TX, USA
Re: FS: 1990 EF9 Hatch B18B Turbo 8.7 1/8th Nebraska (traitorzxiong)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by traitorzxiong »</TD></TR><TR><TD CLASS="quote">Which pics are recent? PRICE?</TD></TR></TABLE>
The First Top Pics are the current ones.... Testing Waters... Throw me a reasonable offer
The First Top Pics are the current ones.... Testing Waters... Throw me a reasonable offer
Thread
Thread Starter
Forum
Replies
Last Post
4NLINE UNLIMITED
Vehicles for sale
11
Jun 16, 2006 10:31 AM
Xscream
Forced Induction
33
Apr 28, 2003 12:24 PM
