Guess what 4PSI on a non-intercooled B18B does (dynosheets inside)
#1
Guess what 4PSI on a non-intercooled B18B does (dynosheets inside)
Specs
1997 Integra GS
B18B - Stock 97k
T3/T4 .57Trim A/R60 Turbo
Super T mani/down pipe
No intercooler
Factory Clutch
-4 Degrees timing
SAFC tuning/FMU
We did a little more tuning (to flattedn the AF) but the printer ran out of ink. Didn't yield more than a horse or two. For 4 PSI I think thats damn good number
I am using a Super T Turbo kit and I must say this thing is top shelf. Dave has stood behind me with everything I have needed and his customer service is ( just like is product ) one of the best in the buniness. When ever I have had a question or concern he has always addressed this in the most honest way he can - its amazing that there are a couple honest companys out there still today.
Its time for a intercooler, clutch and the up the boost
1997 Integra GS
B18B - Stock 97k
T3/T4 .57Trim A/R60 Turbo
Super T mani/down pipe
No intercooler
Factory Clutch
-4 Degrees timing
SAFC tuning/FMU
We did a little more tuning (to flattedn the AF) but the printer ran out of ink. Didn't yield more than a horse or two. For 4 PSI I think thats damn good number
I am using a Super T Turbo kit and I must say this thing is top shelf. Dave has stood behind me with everything I have needed and his customer service is ( just like is product ) one of the best in the buniness. When ever I have had a question or concern he has always addressed this in the most honest way he can - its amazing that there are a couple honest companys out there still today.
Its time for a intercooler, clutch and the up the boost
#3
Honda-Tech Member
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: Guess what 4PSI on a non-intercooled B18B does (Xscream)
my bro has a similar setup, except one of my manis, and intercooled. at 4psi, that thing SCREAMS. oh ya, B18A in an 89 4th gen. nice numbers!
#4
Re: (DroppedGSR)
Not bad for the time being, needs a clutch bad, the thing was slipping from about 4.5k on up so deffently is shy of what it could lay down. After I'm done I'm lookking for mid 200's with a clutch and a intercooler. Looks very doable on 8PSI at this point in time.
Trending Topics
#10
Re: Guess what 4PSI on a non-intercooled B18B does (Xscream)
As turbo john would say, "welp turn the boost up n lets see what **** we break now"..... sounds like you have a good tuner... good luck
#11
Honda-Tech Member
Join Date: Dec 2001
Location: NW, FL
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Re: Guess what 4PSI on a non-intercooled B18B does (93turbolude)
damn..
not the hp, whats impressive is the torque
at 3.5k
great turbo selection! .57trim perfect for 1834cc
not the hp, whats impressive is the torque
at 3.5k
great turbo selection! .57trim perfect for 1834cc
#15
Honda-Tech Member
iTrader: (3)
Join Date: Feb 2002
Location: MN
Posts: 12,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: Guess what 4PSI on a non-intercooled B18B does (Xscream)
wow..nice #ers bro. It's nice to see some MN peps here. Run it at RockFalls next month..... easy loooow 14 with street tires!
#16
Honda-Tech Member
Join Date: Sep 2001
Location: Twin Cities
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
Re: Guess what 4PSI on a non-intercooled B18B does (Xscream)
Come over to Elite and we'll get some more power out of her. That a/f isnt exactlt mint.
-Seth
-Seth
#17
Honda-Tech Member
Join Date: Jan 2002
Location: USA
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
Re: Guess what 4PSI on a non-intercooled B18B does (Xscream)
I thought john haley went under...
Someone told me that a lot of their mechanics were doing work for their buddies for free, using the shop and dyno, and getting parts at cost for their friends.
Anyone know if this is true??
Someone told me that a lot of their mechanics were doing work for their buddies for free, using the shop and dyno, and getting parts at cost for their friends.
Anyone know if this is true??
#20
Re: Guess what 4PSI on a non-intercooled B18B does (Briman2021)
John's shop isn't under, as for what went on there, I try to stay out of the gosip.. There was some under the table things going on though from what I know. Still around, scaled back a bit, but still has a dyno and a shop.
#21
Honda-Tech Member
Join Date: Jan 2002
Location: USA
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
Re: Guess what 4PSI on a non-intercooled B18B does (Xscream)
yeah, i dont mean to gossip, but I went by there and there was only 1 john haley truck and no other cars, and it was during regular business hours, so it must have been a fluke or something.
Are they still operating as a store for buying parts?
Are they still operating as a store for buying parts?