I need a machine shop a.s.a.p. to polish up my crank and do my bearings right away.. Motors just sitting on a stand waiting to go,..My friends shop can't find anyone that can do it for 2 weeks and I have a week to the ITR expo.. I will drive it anywhere near toronto..Any suggestions?

 

there are a few in the yellow pages bro....check it out

 

Graham @ Canadian Cylinder Head located in North York

(416) 630-0854

 

thanks

 

http://www.conceptsonwheels.com - thornhill, ont (they do everything)

 

Gord Bush Performance. 905-677-8657. Arguably the best.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wildoutwhitegsr &raquo;</TD></TR><TR><TD CLASS="quote">Graham @ Canadian Cylinder Head located in North York

(416) 630-0854

</TD></TR></TABLE>

tell him MATT sent you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wildoutwhitegsr &raquo;</TD></TR><TR><TD CLASS="quote">Graham @ Canadian Cylinder Head located in North York

(416) 630-0854</TD></TR></TABLE>

For sure best machine shop in Toronto, Graham built my 2.0L

 

Thanks alot guys, Graham is taking the motor today, going to have it back for friday.. Expo is going to happen...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by funkijunki &raquo;</TD></TR><TR><TD CLASS="quote">Thanks alot guys, Graham is taking the motor today, going to have it back for friday.. Expo is going to happen... </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16C1 &raquo;</TD></TR><TR><TD CLASS="quote">Gord Bush Performance. 905-677-8657. Arguably the best. </TD></TR></TABLE>

Without question

 

i live in the toronto area...I am thinking of getting my type r bore to 2.0 L in the near future do you guys know around how much the labour would cost to bore and hone the cylinders?

Thanks

Nick

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RaVAGE00 &raquo;</TD></TR><TR><TD CLASS="quote">http://www.conceptsonwheels.com - thornhill, ont (they do everything)</TD></TR></TABLE>

U better have deep pockets if u go to these guys. There prices are crazy high.

 

Thanks guys, I get the motor back tomorrow, install on sat and leave on for expo on sunday...

 

Graham is a good guy - glad to hear you'll have everything ready in time