What's the best way of removing fingerprint smudges from the gauge face without damaging it? I just received an AUDM ITR cluster with Aussie prints on it.

 

Spray a little of this, Wipe it off using some elbow grease and you should be good



All purpose owns you

 

Have you tried it? I think it might be a little too powerful.

 

I need some of that for my engine bay

 

Personally, I would recommend Windex. Simple Green is great but I would definately dilute it.

 

Yes I tried it, I didn't mix it with water or anything, pour it straight from the bottle to a spray bottle that I used for the engine bay as well as for other parts such as the gauge face

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STYLiNxCHiQ_DA9 &raquo;</TD></TR><TR><TD CLASS="quote">Yes I tried it, I didn't mix it with water or anything, pour it straight from the bottle to a spray bottle that I used for the engine bay as well as for other parts such as the gauge face </TD></TR></TABLE>

It didn't fade the black?

 

go get some meguire's plastic polish... it works awesome, I used it on my headlights and my gauge face and it's awesome...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 20geezer00 &raquo;</TD></TR><TR><TD CLASS="quote">go get some meguire's plastic polish... it works awesome, I used it on my headlights and my gauge face and it's awesome...</TD></TR></TABLE>

I'll look into it.

What about Goo Gone? Too strong?