Have a b18c1 gsr motor with a 98 type R 4-1 header. Getting ready to go have 2.5" piping run all the way back with no cat. How much should I be paying to have this done? and I should I buy the 2.5" flanges for this or will the muffler shop already have access to these or another way to do it?

 

Its like $50 to install a cat-back, so whatever the cost of piping is plus $50.

 

you'll prob. be looking at about $500 if it's a good shop, and they should have everything on hand.

 

"you'll prob. be looking at about $500 if it's a good shop, and they should have everything on hand."

Oh yeah? Let me get right on that, thanx for the help!

 

why not go for a complete catback and get a high flow cat or test pipe. will sound alot better unless its just for track use then get the custom. ( just my opinion)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ahemming06 &raquo;</TD></TR><TR><TD CLASS="quote">
"you'll prob. be looking at about $500 if it's a good shop, and they should have everything on hand."

Oh yeah? Let me get right on that, thanx for the help!

</TD></TR></TABLE>

??? That **** better be mandrel bent and made out of titanium. I paid in the $200 range for mine

 

i paid 80 for the b-pipe push bent with flanges