I was wondering what i would need to make the low fuel light work in my sir cluster. has anyone done this ???

 

get a good wiring diagram that should tell you whats what.

 

you need the sending unit for the SIR out of the tank, i have heard da integra's sending unit will work as well,

 

you need the low fuel level...signal sending unit..

or i dont know what i'm talking about ...but you need something to send the "low fuel/reserve" signal to the gauge cluster....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crx Jimmy &raquo;</TD></TR><TR><TD CLASS="quote">you need the sending unit for the SIR out of the tank, i have heard da integra's sending unit will work as well,</TD></TR></TABLE>

x2 this is correct

 

yea what they ^ said....but yea i've read somewhere the teg's unit will work too

 

Most likely there would be a small sensor that you would
have to put in the gas tank at the appropriate level
on the sending unit..

This is a from a Nissan truck but
I would imagine it would be something similar:

 

thanx, how much do you guys think those sensors run for

 

Dunno if this'll help, but from what I've read the DA low fuel sensor will work in our 88-91 Civic/CRX's. Just go down to a junkyard and pull a pump/pick out the parts that you need.

Feel free to correct me if I'm wrong .

 

will do, is the pump under the back seats in a da