my crx has a b18b swap in it and i have been trying to get it running right for a while it is throwing to codes it is converted to a obd1 there it a code 4 for camshaft posotion sensor and code 7 for throttle body sensor know for the throttle body sensor was brocken when the motor was shipped so i put the old won off my old motor on it but it is htrowing a code is there any adjustment needed, and what kind of condition would my motor be running like if those two are bad , because it idles rough and it surges alittle bit please help me im tired of messing with

 

sounds like you may have a short in the wire for the TPS sensor

for the crank position sensor that is in youre distributor and the only real way to fix that is to buy a new dizzy

 

bump

 

the tps sensor should be calibrated , closed throttle voltage set too when swapping sensors..

 

how do you calibrated, and set the closed throttle voltage but that would throw a check engine light and would it make it idle bad