Few things i made for a friend
Thread Starter
wrenchin'
Joined: Sep 2003
Posts: 3,643
Likes: 2
From: Full of shit in NY, USA
Few things i made for a friend
nothing real special. i need to buy my own welder, all i had access to was a fluxcore. everything done with a hobart 140 with flux wire.
3" a/c capatible DP w/flex
wastegate elbow for his revhard manifold
wategate dumptube
and a couple close up pics of the welds. i was pretty happy with how they came out for fluxcore, i just wish i could have borrowed my buddy's mig to do all this. but for flux, i think its pretty good
and or course, signed by me
hope u guys like!
3" a/c capatible DP w/flex
wastegate elbow for his revhard manifold
wategate dumptube
and a couple close up pics of the welds. i was pretty happy with how they came out for fluxcore, i just wish i could have borrowed my buddy's mig to do all this. but for flux, i think its pretty good
and or course, signed by me
hope u guys like!
Thread Starter
wrenchin'
Joined: Sep 2003
Posts: 3,643
Likes: 2
From: Full of shit in NY, USA
Re: Few things i made for a friend (drewbie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drewbie »</TD></TR><TR><TD CLASS="quote">you weld jizzed all oveer the pipe</TD></TR></TABLE>
that was a very intelligent response, thank you
that was a very intelligent response, thank you
Trending Topics
Honda-Tech Member
Joined: Aug 2005
Posts: 969
Likes: 0
From: abbotsford, bc, canada
Re: (option_2)
when your welding a flange to pipe with fluxcore, crank up your heat and stay on the flange most of the time, just move your torch up for a second to link the weld bead up. that way u wont burn a hole through the pipe, and you will get a nice bead. 
Thread Starter
wrenchin'
Joined: Sep 2003
Posts: 3,643
Likes: 2
From: Full of shit in NY, USA
Re: (shortyz21)
it funny, i actually figured that out towards the end. i had very limited experience with fluxcore before i did all this, so i had a little learning to do
Honda-Tech Member
Joined: Dec 2004
Posts: 1,040
Likes: 0
From: dearborn, Michigan, USA
Re: Few things i made for a friend (I Have an STD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I Have an STD »</TD></TR><TR><TD CLASS="quote">that was a very intelligent response, thank you</TD></TR></TABLE>
LMFAO! if your friends are like mine, they always say "as long as its sealed I dont care what it looks like!"
Flux core=teh new JdM SkiLLz yO LOL
oh and btw, im sorry you have an STD...
LMFAO! if your friends are like mine, they always say "as long as its sealed I dont care what it looks like!"
Flux core=teh new JdM SkiLLz yO LOL
oh and btw, im sorry you have an STD...
Honda-Tech Member
Joined: Mar 2003
Posts: 5,661
Likes: 0
From: here n there n everywhere
Re: Few things i made for a friend (SMSFAB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SMSFAB »</TD></TR><TR><TD CLASS="quote">LMFAO! if your friends are like mine, they always say "as long as its sealed I dont care what it looks like!"
Flux core=teh new JdM SkiLLz yO LOL
oh and btw, im sorry you have an STD... </TD></TR></TABLE>
haha yeah well i told him b4 he started "it better be sealed and presentable" and he did just that! im still gonna spray it with hi temp paint then wrap it keep that engine bay cool as ice
Flux core=teh new JdM SkiLLz yO LOL
oh and btw, im sorry you have an STD... </TD></TR></TABLE>
haha yeah well i told him b4 he started "it better be sealed and presentable" and he did just that! im still gonna spray it with hi temp paint then wrap it
keep that engine bay cool as ice
Thread
Thread Starter
Forum
Replies
Last Post
*Boostwerks*
Welding / Fabrication
99
Dec 14, 2006 11:13 PM
AspectIndustries
Forced Induction
16
May 11, 2004 11:37 AM
st00pid
Forced Induction
58
Jun 28, 2003 01:49 PM