In need on tig welder in san jose (gun related)
Thread Starter
Joined: Oct 2001
Posts: 871
Likes: 0
From: by the beach west la
In need on tig welder in san jose (gun related)
I need a little weld job to finish my hk g3 clone build. If any of you can help me out let me know. I would have to be there when it is done and it should take no more than 15 minutes. Here's a pic of the receiver 
here's a pic of the welds
If worst comes to worse my trusty weld pak 100 and grinder wil have to do
here's a pic of the welds
If worst comes to worse my trusty weld pak 100 and grinder wil have to do
Thread Starter
Joined: Oct 2001
Posts: 871
Likes: 0
From: by the beach west la
Re: In need on tig welder in san jose (Lam.N)
I finally got the rest of my parts in. This is what I need welded.
The cocking tube has a 2 inch extention that slides into the receiver. I still need to demill my kit and put the cocking tube on the lathe to remove the excess material so that it fits the receiver. There needs to be a butt weld where the cocking tube meets the receiver. It's only about 4 inches of bead that needs to be layed in total. It 16gauge mild steel. How much are you charging? thanx
The cocking tube has a 2 inch extention that slides into the receiver. I still need to demill my kit and put the cocking tube on the lathe to remove the excess material so that it fits the receiver. There needs to be a butt weld where the cocking tube meets the receiver. It's only about 4 inches of bead that needs to be layed in total. It 16gauge mild steel. How much are you charging? thanx
Trending Topics
Thread Starter
Joined: Oct 2001
Posts: 871
Likes: 0
From: by the beach west la
Re: In need on tig welder in san jose (Lam.N)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lam.N »</TD></TR><TR><TD CLASS="quote">damn. i was thinking 10 bucks. and some beer. </TD></TR></TABLE>
I'll take you up on that offer and instead of beer how about a Lee's ham sandwich mmmm...haha j/k. Gas is expensive to drive to fremont
</TD></TR></TABLE>I'll take you up on that offer and instead of beer how about a Lee's ham sandwich mmmm...haha j/k. Gas is expensive to drive to fremont
Thread Starter
Joined: Oct 2001
Posts: 871
Likes: 0
From: by the beach west la
Re: In need on tig welder in san jose (Lam.N)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lam.N »</TD></TR><TR><TD CLASS="quote">awesome. i have free time after 6pm all this week. let me know.
PM'd you.</TD></TR></TABLE>
I'm busy for the next 3 weeks so I'll ring you up when I'm ready. Thanx in advance
PM'd you.</TD></TR></TABLE>
I'm busy for the next 3 weeks so I'll ring you up when I'm ready. Thanx in advance
Thread Starter
Joined: Oct 2001
Posts: 871
Likes: 0
From: by the beach west la
Re: In need on tig welder in san jose (...Lost)
Here's the info on the california assault weapons FAQ.
http://www.calguns.net/a_california_arak.htm
http://www.calguns.net/calgunf...25788
http://www.calguns.net/calgunf...?f=81
The current situation with the 2000 assault weapons ban is that if it wasn't listed in 2000 its ok to buy but you must assemble it to comply with sb23. So the gist of it is that it must have a pinned mag if you want all the "EVIL" parts, but if you want a detachable mag then you must loose the pistol grip and flash hider. Right now we are hoping the DOJ list these receivers so a 90day registration period opens so we can have our black rifles in an uneutered state. So if you are californian and want an offlist AR/AK rifle you better hurry.
http://www.calguns.net/a_california_arak.htm
http://www.calguns.net/calgunf...25788
http://www.calguns.net/calgunf...?f=81
The current situation with the 2000 assault weapons ban is that if it wasn't listed in 2000 its ok to buy but you must assemble it to comply with sb23. So the gist of it is that it must have a pinned mag if you want all the "EVIL" parts, but if you want a detachable mag then you must loose the pistol grip and flash hider. Right now we are hoping the DOJ list these receivers so a 90day registration period opens so we can have our black rifles in an uneutered state. So if you are californian and want an offlist AR/AK rifle you better hurry.
Member
Joined: Jun 2003
Posts: 2,262
Likes: 0
From: Somewhere in the lower part of, MI, U.S.A
Re: In need on tig welder in san jose (...Lost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ...Lost »</TD></TR><TR><TD CLASS="quote">PTR 91 huh? what are the regulations in CA to own such a gun? I know CA is a MF'er in gun control/laws...here in florida, we're A-OK [URL]http://i23.photobucket.com/albums/b399/MrEsteban413/DSCF0018Medium.jpg</TD></TR></TABLE>heh i dont really like glocks but i always have fun shooting my friend's Glock 17 with a 31 round clip lol... BTW USP Tac FTW!!!
Princess
Joined: Dec 2003
Posts: 10,123
Likes: 17
From: ATX
Re: In need on tig welder in san jose (onePOINTsix)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onePOINTsix »</TD></TR><TR><TD CLASS="quote">heh i dont really like glocks but i always have fun shooting my friend's Glock 17 with a 31 round clip lol... BTW USP Tac FTW!!! </TD></TR></TABLE>
not a tac but i'm not made of $$ either...USP 9mm...BTW in FL, you wait to buy a pistol (couple business days), or you walk home sameday with an AR15 and 2 30rd mags after a "background check"...all done within an hour depending on the line...
</TD></TR></TABLE>not a tac but i'm not made of $$ either...USP 9mm...BTW in FL, you wait to buy a pistol (couple business days), or you walk home sameday with an AR15 and 2 30rd mags after a "background check"...all done within an hour depending on the line...
Thread
Thread Starter
Forum
Replies
Last Post
JKim0901
Acura Integra
3
Mar 15, 2004 09:01 AM