i am getting a map sensor code and i need to know if there is any common problems with it. its a vaccum line hooked up to a map sensor mounted on the firewall. thanks in advance for any help.

 

bump i know somebodys had to have worked on a map sensor before.

 

as long as the vaccume line to the map sensor is not colapsed replace the map sensor

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by si0385. &raquo;</TD></TR><TR><TD CLASS="quote">as long as the vaccume line to the map sensor is not colapsed replace the map sensor </TD></TR></TABLE>

make shure its calibrated........ it should turn on with a faulty map, just run like crap

 

yea it runs just real choppy like and sounds like its missing. but i can understand is that it was fine before i took the t.b. off to put that gasket on. so i should replace the map sensor??

how exactly do u calibrate it??

 

what code are u getting? like as in what number/flashes and what ecu/motor are u running?

 

im getting a 5 code (map). im running a d15b7 with the stock 91 hf ecu.