if anyone coudl take a look though their manual and find out what size bolts these are (length and thread size) that would be great. I lost my manual and need to get bolts I lost
I need:
bolts to hold abs sensor (front, the ones that hold the actual sensor.)
front damper fork bolt ( the bolt that pinches it to the strut )
lower ball joint castle nut

thanks. this is a repost because the thread i made before got deleted since i accidentally used all caps in the title.

 

Couldn't you just order them from http://www.hondaautomotiveparts.com??

 

I just wanted to pick them up from somewhere nearby.. not pay s hipping on 5 bolts that will come in a week. they don't tell you sizes on there either so I couldn't just look there for sizes.

 

might be hard to find the exact same bolt/nuts. e.g. the flanged bolt heads on alot of hondas are not commercially available. not a big deal for some of the parts you've mentioned (though the shock fork might need a honda bolt), but make sure you get grade 8 hardware.

doesn't seem like a lot of stuff (unless you're buying spares) why not go to your local honda dealership?

 

shock fork pinch bolt = 10x1.25mm

castle nut = 14x2.0mm

abs front sensor = 8x1.25mm

the abs sensor was a bitch to find

 

i've just been busy as s*** and I have to drive 30 mins away to get to the dealer, i'm just not able to. when i origionally posted this i figured i'd be able to get it on the way home from work but, I guess i'll have to go after work today for them.

 

http://www.hondaautomotivepart...UCKLE

Look down in the list, it tells sizes.

33761 017 2 NUT, CASTLE (14MM) NO COLOR 3.67


and on a bolt like this:

31004 014 4 BOLT, FLANGE (8X14) NO COLOR 0.73

8mm flange bolt 14mm long

thread pitches should all be fine threads