Autometer Tach Wiring Help Needed! (searched)
Thread Starter
Joined: Feb 2005
Posts: 90
Likes: 0
From: Lakeville, MN, USa
Autometer Tach Wiring Help Needed! (searched)
Here is my setup first off:
Black - Negative 12V
Red - Positive 12V
Green - Blue Wire coming off the Dizzy harness
Anyway it works now.. but it seems to be really low when i rev it it should be at 4500 but instead it shows about 1500 RPM
does anyone have any idea why its getting such a low reading?
Black - Negative 12V
Red - Positive 12V
Green - Blue Wire coming off the Dizzy harness
Anyway it works now.. but it seems to be really low when i rev it it should be at 4500 but instead it shows about 1500 RPM
does anyone have any idea why its getting such a low reading?
Thread
Thread Starter
Forum
Replies
Last Post