I am looking for theB16B engine shortblock OEM part number .
Who can help ?

Thanks

Douglas

 

Ask a Honda Civic dealer in Japan.

 

P72

 

same as b18c-R

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by No_Fear &raquo;</TD></TR><TR><TD CLASS="quote">same as b18c-R</TD></TR></TABLE>

So the B18C has a B16 crank?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Aquafina &raquo;</TD></TR><TR><TD CLASS="quote">So the B18C has a B16 crank? </TD></TR></TABLE>

the B18C crank and B18CR crank are 87.20mm...

the b16a and B16B crank is 77.40mm...

The B16B block is the same deck height as the b18C block but has a 77mm crank

what this means is the block is P72 and the Crank is PR3

The B16B rods however are 142.8mm in length to make up for the extra deck height

The B16a Rods are 134.36mm in length

The B18C rods are 137.9mm in length

does this clear everything up?

 

I knew all that.

He said short block, not block. He also said part number.

A B18C short block is not a B16B short block.

Incase you didn't sense the sarcasm in my post.

 

Its the internet...am I supposed to know your facial expressions too?

The part number on the back of the block I have is :

P72
1-1

Next time let me know about your sarcasm and I'll make sure not to post anything informational for anyone....

 

Generally a P/N is as follows

P/N#08W16-S0K-200F

 

I noticed your not in the US. The B16B isn't available in the US, so a part number here would be non-existant. I dont know if the Civic Type R was ever available in your area, but if it was, just call a dealer and ask.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedZone &raquo;</TD></TR><TR><TD CLASS="quote">

The B16B rods however are 142.8mm in length to make up for the extra deck height

The B16a Rods are 134.36mm in length

The B18C rods are 137.9mm in length

does this clear everything up? </TD></TR></TABLE>

Now does anyone know where I can obtain B16B rods? OEM or aftermarket as a last resort?

 

11000-P72-020

B16B - B18C Short block Part Number

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eViL-DaRkNeSs &raquo;</TD></TR><TR><TD CLASS="quote">
11000-P72-020

B16B - B18C Short block Part Number</TD></TR></TABLE>


Wow, this thread is great. Short block consists of a fully assembled bottom end. Who gives a **** about deck height b18c and b16b are not the same part number. You are going to have to find out from somebody that has access to honda of japan.

 

does any one know

B16B rods Part number ???

 

Anyone?

 

b16b is a rare engine.
very hard to find in the US.

 

You can have custom rods made by Cunningham.

 

Block . 11000-PCT-801
Crank . 13310-PCT-000
Rods . 13210-PCT-000
Pistons . 13010-PCT-000

Just can't find Complete Head P/N something started like 10003-XXX-XXX
ITR is 10003-P73-G03

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Aquafina &raquo;</TD></TR><TR><TD CLASS="quote">

So the B18C has a B16 crank? </TD></TR></TABLE>
only the block can find in US

b16b was sold only in Japan.
so will not find crank/rods.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedZone &raquo;</TD></TR><TR><TD CLASS="quote">

the B18C crank and B18CR crank are 87.20mm...

the b16a and B16B crank is 77.40mm...

The B16B block is the same deck height as the b18C block but has a 77mm crank

what this means is the block is P72 and the Crank is PR3

The B16B rods however are 142.8mm in length to make up for the extra deck height

The B16a Rods are 134.36mm in length

The B18C rods are 137.9mm in length

does this clear everything up? </TD></TR></TABLE>

thats incorrect...the B16B (PCT) and B16A (PR3) cranks are different.. as seen here...

 

you bring up some very good points. I have a B16B crank still in the block with rods and pistons. I will take them out and compair with what you have.

What I do notice in your pictures is that the B16B crank looks simmilar to the B18a/b/B20 crank.

I will check what I have at the shop and compair with your so we can learn more about the B16B crank.

good write up

 

B18A/B B20 crank? it looks more like a ITR/GSR to me...

 

I never said it didnt look like a b18c crank...just said it looked simmilar to the Ls/B20 crank.