What exhaust size should i get for a mild all motor setup? I already know i cant exceed 2.5 but i also dont wanna kill my low end and midrange.... what size should i get?

 

2.36 inches is pretty good. Also called 60mm in some cases.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shamoo &raquo;</TD></TR><TR><TD CLASS="quote">2.36 inches is pretty good. Also called 60mm in some cases.</TD></TR></TABLE>

Yup.......2.3 to 2.5

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shamoo &raquo;</TD></TR><TR><TD CLASS="quote">2.36 inches is pretty good. Also called 60mm in some cases.</TD></TR></TABLE>Yeah im aware of this.... im also aware of how 2.78 is too damn big!! Thanx

 

2.5 is pretty much universal for all since it works well with mild n/a setups and mild turbo setups.

 

i have 2.36, that is basically ur only choice besides 2.5, and 3 inch is out of the question

 

60mm(2.36") is your best bet. there are tons of exhausts that come in this size. 2.5 can even be overkill.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSvtec03 &raquo;</TD></TR><TR><TD CLASS="quote">60mm(2.36") is your best bet. there are tons of exhausts that come in this size. 2.5 can even be overkill.</TD></TR></TABLE>No 2.76 is overkill!! Haha, jk... but yeah i appreciate it guys... 2.36 it is..... and btw just for anyone ever searchin this topic EVO2 exhaust is not a full 2.36(2.5inch) piping! It turns into 2.76(2.3/4inch) piping! Hence, HUGE loss of power below vtec...