98 spec type r in a 94 ls?
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 162
Likes: 0
From: Reno, Tx, US
98 spec type r in a 94 ls?
I did a search but did not find what I was looking for? I want to swap a type r into my 94 ls but not sure of what all I need to switch and need to keep?
Member
Joined: Mar 2004
Posts: 2,358
Likes: 0
From: Cuba
Re: 98 spec type r in a 94 ls? (Steve-o)
I believe the hybrid forum may be of more help. Additionally, I am sure there is a decent amount of information about this on H-T. Perhaps you should revise your search criteria.
Honda-Tech Member
Joined: May 2002
Posts: 7,812
Likes: 1
Re: 98 spec type r in a 94 ls? (Steve-o)
Ill be nice since Im a Texan too. 
You will need an OBD1 GSR engine harness. Some sort of chipped P28. Entire engine, transmission, etc etc. All your mounts would be the same.
Hybrid forum on this board would know all your answers to the swap.
You will need an OBD1 GSR engine harness. Some sort of chipped P28. Entire engine, transmission, etc etc. All your mounts would be the same.
Hybrid forum on this board would know all your answers to the swap.
Trending Topics
Senior Member
Joined: Jun 2004
Posts: 10,399
Likes: 3
From: Chicagoland, IL
Re: 98 spec type r in a 94 ls? (Steve-o)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Steve-o »</TD></TR><TR><TD CLASS="quote">thanks for the hospitality ! were at in texas?</TD></TR></TABLE>
Migs is in Dallas-area. I want to say Richardson but that's probably wrong.
(As already noted, the Hybrid forum is where you want to be. Few people in here have swapped a B18C5 into an LS, but it's been done dozens of times in other forums).
Make sure the engine you get still has a VIN and block code not ground off. A lot of B18C5's are hot.
Also, yeah, Search is good. There's tens of millions of posts on this board, and lots of swaps have been done. (Want an H22 in the trunk of your Integra? No problem!
)
Great thread to start in:
https://honda-tech.com/zerothread?id=650230
Actually, Erik95LS has a B18C5 in his car, but he started with a whole totalled ITR. You could try him, he's got that West Virginia friendly thing going for him.
Migs is in Dallas-area. I want to say Richardson but that's probably wrong.
(As already noted, the Hybrid forum is where you want to be. Few people in here have swapped a B18C5 into an LS, but it's been done dozens of times in other forums).
Make sure the engine you get still has a VIN and block code not ground off. A lot of B18C5's are hot.
Also, yeah, Search is good. There's tens of millions of posts on this board, and lots of swaps have been done. (Want an H22 in the trunk of your Integra? No problem!
)Great thread to start in:
https://honda-tech.com/zerothread?id=650230
Actually, Erik95LS has a B18C5 in his car, but he started with a whole totalled ITR. You could try him, he's got that West Virginia friendly thing going for him.
Member
Joined: Mar 2004
Posts: 2,358
Likes: 0
From: Cuba
Re: 98 spec type r in a 94 ls? (Steve-o)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Steve-o »</TD></TR><TR><TD CLASS="quote">thanks for the help!!! </TD></TR></TABLE>
Okie dokie then. Since you realize this is not the best place for the post, ask a mod to move it to the hybrid forum!
</TD></TR></TABLE>Okie dokie then. Since you realize this is not the best place for the post, ask a mod to move it to the hybrid forum!
Honda-Tech Member
Joined: Mar 2001
Posts: 8,119
Likes: 0
From: WV, USA
Re: 98 spec type r in a 94 ls? (migs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by migs »</TD></TR><TR><TD CLASS="quote">Ill be nice since Im a Texan too.
You will need an OBD1 GSR engine harness. Some sort of chipped P28. Entire engine, transmission, etc etc. All your mounts would be the same.
Hybrid forum on this board would know all your answers to the swap. </TD></TR></TABLE>
or just add the few wires to the chassis side of the engine-bay harness already in the car.
You will need an OBD1 GSR engine harness. Some sort of chipped P28. Entire engine, transmission, etc etc. All your mounts would be the same.
Hybrid forum on this board would know all your answers to the swap. </TD></TR></TABLE>
or just add the few wires to the chassis side of the engine-bay harness already in the car.
Honda-Tech Member
Joined: Mar 2001
Posts: 8,119
Likes: 0
From: WV, USA
Re: 98 spec type r in a 94 ls? (Erik95LS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris F »</TD></TR><TR><TD CLASS="quote">Actually, Erik95LS has a B18C5 in his car, but he started with a whole totalled ITR. You could try him, he's got that West Virginia friendly thing going for him.
</TD></TR></TABLE>
aww, how sweet.
</TD></TR></TABLE>
aww, how sweet.
Member
Joined: Mar 2004
Posts: 2,358
Likes: 0
From: Cuba
Re: 98 spec type r in a 94 ls? (Chris F)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris F »</TD></TR><TR><TD CLASS="quote">You could try him, he's got that West Virginia friendly thing going for him.</TD></TR></TABLE>
j00 got a purdy mouf.
j00 got a purdy mouf.
Honda-Tech Member
Joined: Mar 2001
Posts: 8,119
Likes: 0
From: WV, USA
Re: 98 spec type r in a 94 ls? (Mythias)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mythias »</TD></TR><TR><TD CLASS="quote">
j00 got a purdy mouf. </TD></TR></TABLE>
did you even look at my avatar?
j00 got a purdy mouf.
</TD></TR></TABLE>did you even look at my avatar?
Thread
Thread Starter
Forum
Replies
Last Post