sup guys,
my turbo is a garrett turbo and the oil feed is made for a 1/4"th male piece. but my oil line kit came with a steel line with 1/8"th female ends,and a 1/8"th elbo. so i went and got a 1/4"th-1/8"th reducer and im running the 1/8"th elbo on it. will i be fine running the 1/8"th elbo like the kit came with,or is it to small to get enough oil to the turbo?

 

someone has to know,or atleast is anyone else running a 1/8th"

 

Almost everyone has an 1/8 NPT fitting somewhere in the feed line. You will probably even need a restrictor.

 

so i should be fine running it? even on a oil cooled turbo?

 

Yes, it the same as any other turbo in the world. Like I said, you may even need a restrictor. Lots of people run -3 AN lines which are much smaller than any 1/8 NPT fitting.