okay ignore my other post about installing headlights i got the projectors working and now i just need to figure out how to wire up the led halo rings. this is what i want

i want the highbeam and lowbeam halos to be lit whenever my lowbeams are on and i dont want them to blink with my turn signals. basically what wires should i splice them with so that both of the halos stay constantly on whenever my parking lights or headlights are on. thanks

please and tips tricks or suggestions are welcome


angel eye haters no need reply. thanks

 

morning bump

 

you should be able to splice them in with the power and ground from your park lights. Figure out which wire is power and which is ground there is a third wire that controls the flashing function for your turn signal. I'm not sure on the colors but it's not to hard to figure out.

 

Yeah, hondaluva is right

I wired mine to the parking lights ( not the turn signal) so whenever I put my parking lights on, the halos come on.

A good tip... solder your connections and use shrinkwrap around the splices...I also took the extra step of putting flexible fiberglass sheeting around the hookup wire I used. And about the hookup wire...use something good...NOT speaker wire

BTW...i HATE my halos. They don't adjust right...period...so I have very poor visibility. ANYONE else feel the same?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Datac9991 &raquo;</TD></TR><TR><TD CLASS="quote">Yeah, hondaluva is right

I wired mine to the parking lights ( not the turn signal) so whenever I put my parking lights on, the halos come on.

A good tip... solder your connections and use shrinkwrap around the splices...I also took the extra step of putting flexible fiberglass sheeting around the hookup wire I used. And about the hookup wire...use something good...NOT speaker wire

BTW...i HATE my halos. They don't adjust right...period...so I have very poor visibility. ANYONE else feel the same? </TD></TR></TABLE>

yep they suck bad.. cant wait to get my 98+ conversion when i get the oem's back

 

anyone have pictures of the power and ground wires from the parking lights i know its the red and black wires but how would i splice it just get a wire cutter and roll up the ends and solder it? sorry im not familiar with electrical crap at all. i think i just need some pictures thanks though

 

actually if one of you guys are bored and wanna help me out wanna give me step by step detailed instructions via pm's or aim.... my aim is vwagonisbangin

 

Man its really easy, just find out which of the wires is the flasher and don't use that one. Also just a tip, as mentioned above the light output kind of sucks on these lights. What I did was the 9005 conversion and now everything is great. And one more thing, they do adjust, they just adjust very slowly. Oh yeah, one final tip....Silicone around everything before you install them to avoid condensation becuase even though they are new they will probably still fall victim to the dreaded headlight fogging. Good luck.

 

okay well i went to work (sears) and got a wire stripper and electrical tape and i might use my dads solder. my friend that has angel eyes on his o3 accord told me what to do and at first i was like WHAT, but then after drawing a picture i figured it out i think im all eyes and i cant figure things out just by reading.

anyways i bought silverstars for them today for the lowbeams and they look nice and when ever i turn em on with headlights they are absolutely stunning haha

yea tonight im gonna take off the bumper again and readjust the headlight cause i messed up last night and then tomorrow morning ill wire up the halos since i left em in my gf's purse. wish me luck ill post up pictures when im done.