ok i have a D16Z6 and I wanna turbo it soon and i want to know an estimate on how much it would cost and what i would need. I have a list on what i think i need here it is.

Greddy Turbo Kit T3/T4(of course you need the turbo)
Uberdata Tuning
Piston Rings
ARP Head Studs
Greddy Front Mount Intercooler
so anything else you want to add to it that i forgot its welcome. im thinkin im gunna need about 2G's for it all.

 

well have fun trying to find a greddy t3/t4. they dont use that type of notation for their turbos.

also, are you really gonna take apart the engine just to replace the rings? might as well redo all the internals while you are in there.

as far as price goes, there is no way to really estimate it. the components you get will probably be dictated by your budget. you could easily spend $1000 on just an exhaust manifold or you could spend $200. turbo parts vary in price greatly. just depends on how much you are willing to spend and how much power you want to make.

ive seen a few homemade turbo kits get by on $2K but i doubt you will get by on that, unless you use all used parts. dont forget fuel components, wastegates, bov etc.

check out this link https://honda-tech.com/zerothread?id=1263795

 

yea the bov and waste gate is in the turbo kit well thanks for the help i guess. my budget is only 2k but now that i think about it. i could just build up the motor and then if i want a turbo i could just slap one on there i guess.

 

do a lot more research, pretty much anythign n/a will not work with a turbo set up first off, and 2k is not nearly enough to put together a decent turbo set up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gssr &raquo;</TD></TR><TR><TD CLASS="quote">do a lot more research, pretty much anythign n/a will not work with a turbo set up first off, and 2k is not nearly enough to put together a decent turbo set up</TD></TR></TABLE>

ditto

 

that isnt necessarily true. if you know where to look you can piece together your own kit. i have less than 2k into my car including a wideband and rom burner!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98_4drCivic &raquo;</TD></TR><TR><TD CLASS="quote">that isnt necessarily true. if you know where to look you can piece together your own kit. i have less than 2k into my car including a wideband and rom burner!</TD></TR></TABLE>

whats your setup

 

d16 setup

90$ oil feed and return kit

my log manifold. downpipe flex pipe dumptube package 575 with studkit etcc.

tial 38MM wastegates when purchased with log manifold are 200$

440CC injectors lucas unbadged RC's 225$ for aset of 4.

t3 super 60 500

intercooler . 215$ spoolin spec

spoolin fmic piping kit 245$ plus coupler kit 65$

blow off valve 1g dsm or i sell unbadged greddy RS blow off valves for 75$

from there on. just need some fuel management.


greddy kits dont come with t3t4 turbos btw. they come with tiny t25 versions td05-15G etcc

 

damn phil good prices and some of the best quality products out there. right around the 2000-2500 range too with all brand new parts.

looks like i stand corrected a quality setup can be had for 2K damn d-series, everything is cheaper.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dpetro1 &raquo;</TD></TR><TR><TD CLASS="quote">damn phil good prices and some of the best quality products out there. right around the 2000-2500 range too with all brand new parts.

looks like i stand corrected a quality setup can be had for 2K damn d-series, everything is cheaper.

</TD></TR></TABLE>


damN right !!! spoolin has got H-T's back since 03 !

 

project dc2....those are good prices...im looking to replace my greddy kit and go externally gated this winter, any advise on what turbo to go with,id be intrested in geting your downpipe/mani/wastegate combo.

92 blue vtechatch...if you wana wait a little, id sell you my greddy mani/turbo/elbow/downpipe...thats all you need,buy a jrc intercooler,kteller piping and have it tuned on crome here in madison,and youll be set.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by second edition &raquo;</TD></TR><TR><TD CLASS="quote">project dc2....those are good prices...im looking to replace my greddy kit and go externally gated this winter, any advise on what turbo to go with,id be intrested in geting your downpipe/mani/wastegate combo.

</TD></TR></TABLE>

what kinda power are you lookin to hit. at how much boost. whats your fuel management setup.

 

If you're going to re-ring your pistons, might as well save some money and rebuild your block first.

 

i spent about 2300 on my gsr custom turbo kit. hehehe not really bad. just look for the deals