changing a lot of stuff while i have the time. we dont have a race around here till around mid december

switched from a aebs intake manifold to a str with 8 injector set up
now running ctr cams (gsr before)
ported head (stock port b16 before)
PT70GTQ (t3/67 with 69 rear before)
rebuilt bottom end fresh with lower comp pistons
3" downpipe w/ 4" exhaust (2.5 down pipe w/ 3" exhaust before)
car previously made 556 on 21-22 psi

 

Simple setups make power too. Best of luck w/ the new mods.

 

Very nice. What's the car's best time on the last setup? When do you plan on taking it to the track?

 

only made one pass with the car before went 11.0@135 with no 2 step. should be at the track within a few weeks

 

Good stuff. Keep us updated.

 

thought about throwing on a new manifold?

 

dam fred u work fast.....come work on my car!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by m R g S r &raquo;</TD></TR><TR><TD CLASS="quote">thought about throwing on a new manifold?

</TD></TR></TABLE>

yeah i thought about it, but my pockets do have a point were they stop... and i dont feel i need it just yet

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gravy &raquo;</TD></TR><TR><TD CLASS="quote">dam fred u work fast.....come work on my car!</TD></TR></TABLE>

i told u bish i would help u with the car!!

 

Nice setup you have there, cant wait to see what it does with the new mods. to the south FL fast hondas.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cubish &raquo;</TD></TR><TR><TD CLASS="quote">yeah i thought about it, but my pockets do have a point were they stop... and i dont feel i need it just yet

i told u bish i would help u with the car!!</TD></TR></TABLE>

he said work on his car, not "help him" work on his car

 

What kind of Turbo manifold are you running?

 

sfp coated black

 

i doubt the ITR cams will make more power than the gsr's with that turbo manifold, too much backpressure

 

I didn't evne notice the painted struts until now...that's how I did my old car too

good luck next year man

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDogg &raquo;</TD></TR><TR><TD CLASS="quote">i doubt the ITR cams will make more power than the gsr's with that turbo manifold, too much backpressure</TD></TR></TABLE>]

What are you talking about? How is the GTQ wheel and lots of backpressure go together in a b series applocation?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDogg &raquo;</TD></TR><TR><TD CLASS="quote">i doubt the ITR cams will make more power than the gsr's with that turbo manifold, too much backpressure</TD></TR></TABLE>

well they are CTR cams like posted...dont see how there would be so much back pressure with the turbo im running.... lets say i dont make anymore power.. i have the cams why not put them in? if for some reason i need a new manifold i will deal with that later. not easy to buy everything you need all at once.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gravy &raquo;</TD></TR><TR><TD CLASS="quote">dam fred u work fast.....come work on my car!</TD></TR></TABLE>

get from behind the counter and pick up a wrench dammit..

 

what setupe is that? with out the vtec solonoid is it no vtec or what? i seen other race cars like that i just dont know how it actually works

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drift2004 &raquo;</TD></TR><TR><TD CLASS="quote">what setupe is that? with out the vtec solonoid is it no vtec or what? i seen other race cars like that i just dont know how it actually works</TD></TR></TABLE>

no it still has vtec... if you notice all the tools on the windsheild wiper tray im still working on the car.. finishing it up..

 

looking nice fred. give me a call if you get a chance i need a quote on a ems and your shell.