Okay i screwed up and i dont know why. When i pulled the motor apart, i drew a picture of the bottom end number all of the main bearing caps. 1 being closes to the under drive pulley and 5 being the farthest apart. I also numbered on the paper which pistons and connecting rods were 1-4. When you connect the pistons and connecting rods, i swear they are suppose to come together and show a number am i right or was i tripping when i did this. I can not seem to figure out which is which. I mixed up the pistons with the connecting rods and dont know which is 1,2,3 and 4. On my paper it shows that the piston near the under drive pulley is number 4 and the one near the clutch is number 1. Was i on drugs and i dont remmeber it. Someone help me!