i have a b16a with a s4c tranny(non-lsd) and im using a ACT extreeme 6 puck clutch w/preasure plate the car is daily driven and raced every friday , sometimes with slicks and sometimes w/street tires, it seems to much to me that ive broken 2 tranny casings already and one differential pin my friend also has the same set up and has broken two casings in the period of 6 months (same as i did)
the motor mounts are perfect and in my case im running Energy suspension inserts.

have any of u guys runnuing this type of clutch assemblies experienced any thing like this?????

why might be the cause?(non-lsd)(wrong clutch)???

 

BUMP

 

BUMPISH

 

bump

 

stop droping the clutch and preload

 

never had the promblem was running a open diff 300 miles down the track and no promblems at all .launching @8k and not really preloading

 

step it down to a heavy duty pressure plate....break a clutch rather than a tranny....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SUPERNATURAL &raquo;</TD></TR><TR><TD CLASS="quote">step it down to a heavy duty pressure plate....break a clutch rather than a tranny....</TD></TR></TABLE>

word b series trannys are becoming hard to find.. especially good ones

 

i been 2 years on mine with no tranny problems.

 

Is your disk sprung or solid?

 

thanx for all the replies guys i have a un-sprung ACT 6 PUCK clutch launching @7500 w/slicks-6200- w/FALKEN AZINIS RT615 , ill try a TYPE R Diff next time, ill keeep u guys posted!

 

yea, this helps me too. i was looking for this same set up. looks like its a good way to go. n still looking for a hevy duty pressure plate so if anyone from here has one. let me know. thanks

 

what kind do u want???ACT???Clutch Masters???

 

unsprung extreme pressure plate

 

I run an ACT 6 puck with HD pressure plate. Launching @ 7500-7700 rpm on slicks and i don't pre load. Haven't broke anything yet for 2 years. Fingers Crossed.

 

NA IS BEST
Oh yes, and I haven't had any problems except for breaking a tranny somehow :sob: :sob:

 

i have a j1 tranny using a 6 puck unsprung clutch w/ a heavy duty pressure plate. i launch at 7k and i dump the clutch. 50 passes and no problems.

edit: hasport mount kit

 

i have a 6 puck unsprung with hd plate running fine for 2 years