im changing both my axle and break rotors today. i coundnt find what specs to tighten the axle nut to.

 

134lbs

 

now i have another problem. the new axle wont go in. can i hit the other side to force it in.

 

thanks for the help got the axle in

 

a honda technician said 180 ft/lbs

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sleepy_Red_hatch &raquo;</TD></TR><TR><TD CLASS="quote">a honda technician said 180 ft/lbs</TD></TR></TABLE>

can i get a second opinion on the torque specs

 

its 134 ft/lbs

 

ive always done it to 137ft lbs... i believe thats what the haynes manual says

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sleepy_Red_hatch &raquo;</TD></TR><TR><TD CLASS="quote">a honda technician said 180 ft/lbs</TD></TR></TABLE>

this person is giving out wrong information

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 10secwantabe &raquo;</TD></TR><TR><TD CLASS="quote">134lbs</TD></TR></TABLE>

134 lbs is correct