wastegate vacuum

Thread Tools
 
Search this Thread
 
Old Sep 15, 2005 | 02:15 PM
  #1  
SpOoNisMyFriEnD's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2005
Posts: 183
Likes: 0
From: charlotte, nc, usa
Default wastegate vacuum

after almost completely installing my turbo kit on my b16 i got down to the last item....the wastegate. where is the best place to run the vacuum line from the wastegate. thanx guys
Reply
Old Sep 15, 2005 | 03:39 PM
  #2  
IMALLSLO's Avatar
Honda-Tech Member
 
Joined: Oct 2002
Posts: 708
Likes: 0
From: Big Bear, CA, USA
Default Re: wastegate vacuum (pebblepusher101)

Hook it up directly to manifold vacuum. Run seperate of any other vacuum line if possible to get the most accurate readings. Top vacuum port remains open to atmosphere unless a boost controller is used then fiollow those instructions.
Reply
Old Sep 15, 2005 | 05:04 PM
  #3  
vaporboy12's Avatar
Honda-Tech Member
 
Joined: Nov 2003
Posts: 3,771
Likes: 0
From: Gettin sum, maryland
Default Re: wastegate vacuum (IMALLSLO)

you runin the wastgate spring or a boost controller
Reply
Old Sep 15, 2005 | 05:55 PM
  #4  
SpOoNisMyFriEnD's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2005
Posts: 183
Likes: 0
From: charlotte, nc, usa
Default

it is running on the wastegate spring as of now, i will have a boost controler. i was thinking of tapping my upper charge pipe and just running it from there coming directly out of the manifold. would that work?
Reply
Old Sep 15, 2005 | 06:47 PM
  #5  
vaporboy12's Avatar
Honda-Tech Member
 
Joined: Nov 2003
Posts: 3,771
Likes: 0
From: Gettin sum, maryland
Default Re: (pebblepusher101)

no need to come off manifold pressure
Reply
Old Sep 15, 2005 | 07:06 PM
  #6  
SpOoNisMyFriEnD's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2005
Posts: 183
Likes: 0
From: charlotte, nc, usa
Default

so where would u recomend?
Reply
Old Sep 15, 2005 | 07:27 PM
  #7  
BlueShadow's Avatar
Honda-Tech Member
20 Year Member
 
Joined: Mar 2001
Posts: 4,408
Likes: 4
From: Somewhere in California
Default Re: (pebblepusher101)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pebblepusher101 &raquo;</TD></TR><TR><TD CLASS="quote">so where would u recomend?</TD></TR></TABLE>

You could tap it right at the compressor outlet, but it's not same as hooking up your boost source somewhere after the TB.

Let me explain why:

Say you have a 10 psi spring...if you have it hooked up to the compressor outlet then your WG will open once the compressor is pushing 10 PSI. Now imagine you have your boost guge hooked up to your IM after the TB. Your intercooler and piping will cause a pressure loss of roughly 1-2 psi depending on how efficient it is. So say the boost coming out your compressor is 10 psi, but after the IC the pressure drops to 8 psi. 8 psi is what your boost gauge will read because it is measuring pressure AFTER the intercooler or where the pressure loss occured. So if you hook up your WG boost source to the IM, then the WG recieves the actual boost pressure AFTER IC and piping pressure losses.
Reply
Old Sep 15, 2005 | 07:53 PM
  #8  
WildChild's Avatar
Junior Member
 
Joined: Jul 2004
Posts: 357
Likes: 0
From: Georgia, USA
Default Re: (BlueShadow)

Some hook it up to the manifold. Some hook it up to the turbo. I personally will be getting a nipple welded onto my charge pipe before the throttle plate. While I'm getting my bov flange welded. I'm doing this because Tial recomends it with thier bov's.

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
98integralsB18
Forced Induction
3
Jul 25, 2009 07:29 AM
JDMeg95
Forced Induction
11
Dec 19, 2007 04:16 PM
H22TurboNos
Forced Induction
19
May 13, 2007 01:06 PM
chriskey0829
Forced Induction
1
Feb 1, 2006 07:10 PM
Nextelbuddy
Forced Induction
5
Mar 26, 2004 01:20 PM




All times are GMT -8. The time now is 02:47 PM.