Searched and didn't quite get the answer. Doing a B16A3 swap into a D16Z6 del sol. Im looking for a part number for ECU pins for the knock sensor. All I really need is one pin for the ECU plug and one pin for the shock tower plug. I go to the parts store and the give me a box and tell me to pick what I need so im faced with a hundreds of ECU pins that look very similar. Any part number Honda or a place where I could get them would be great.

 

bump for knowledge

 

Get a chipped p28 then you wont have to worry about knock

 

well i have a P30 and sold my P28 with my D16 so this would be cheaper and quick for the time being

 

y not trade up with someone who needs a p30. i know some emission guys would kill for a p30

 

3rd plug (22P) left to right, 2nd on the top. (looking at the wires)

 

 

thanks but i am looking as how to get the actual pin that goes into the connector itself. I need to get a hold of both the ecu pin and the pin for the plug on the shock tower.

 

The junkyard is your friend I keep plenty of the Connectors and pins from ECU wires and shock tower wires here.