Im looking to run boost in a little while, im just doing research now, but i look at other people's set up and i see quite a few people running 22-25 psi boost, and about 480-490 whp, so i was just wondering what you think their piston compression ratio is. that and any other info would be helpful

Thanks in advance

 

9:1 - 10:1 in between there

 

neato, but isn't 10.1 pushing it a bit with that kinda boost?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vanilla_Gorilla &raquo;</TD></TR><TR><TD CLASS="quote">neato, but isn't 10.1 pushing it a bit with that kinda boost?</TD></TR></TABLE>

You're running race gas for 25 pounds of boost, and 10:1 isn't that much static compression when you're running a 117 octane leaded fuel.

 

it doesnt matter at high boost if ur gonna detonate, u'll blow ur motor with any compression

 

now for picking a turbo, i was looking at the Garrett GT3071R, how would it hold up, and i see its internal waste game with actuator not included, what is that actuator?

 

your not goin to make 500whp on a internally gated turbo check into the gt35r
or t3/67 h.o. that my fav. and what im running made 490whp at 20psi