Acura Integra All Integra Except ITR

GSR IDLE PROBLEM PLEASE HELP !

Thread Tools
 
Search this Thread
 
Old Aug 3, 2005 | 11:02 AM
  #1  
EJK20R's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2004
Posts: 380
Likes: 0
From: Irvine, Ca, OC
Default GSR IDLE PROBLEM PLEASE HELP !

I have a stock 97 GSR and no mods at cold start my rpm is shooting up to 2500 and going down and then at 2000-2100 it fluctuates up and down and when the car is at normal temp it's at 1100. It drives fine and a stop light is at 800 rpms which is normal hits vtec fine no check engine light I'm wondering what is the problem ...?
Reply
Old Aug 3, 2005 | 11:19 AM
  #2  
WhoDoYouThink's Avatar
Junior Member
 
Joined: Mar 2005
Posts: 982
Likes: 0
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (EJK20R)

Check your IACV or FITV, both of these can cause the fluctuating idle problems we all hate so much. good luck
Reply
Old Aug 3, 2005 | 11:34 AM
  #3  
chinaski's Avatar
Junior Member
 
Joined: Nov 2002
Posts: 295
Likes: 0
From: san diego, ca
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (2000turbogsr)

i have the same problem too. but i was told that it could be the IAT sensor is dirty.
Reply
Old Aug 3, 2005 | 12:52 PM
  #4  
EJK20R's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2004
Posts: 380
Likes: 0
From: Irvine, Ca, OC
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (GeeSeR96)

thanks for the reply anyone else ...? with same problem...?
Reply
Old Aug 4, 2005 | 10:14 AM
  #5  
EJK20R's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2004
Posts: 380
Likes: 0
From: Irvine, Ca, OC
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (EJK20R)

ttt
Reply
Old Aug 4, 2005 | 10:40 AM
  #6  
SoEvoL's Avatar
Honda-Tech Member
 
Joined: Jul 2003
Posts: 503
Likes: 0
From: Auburn, AL, USA
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (EJK20R)

i had that same problem, my thermo valve was fubared, apparently it just unscrewed it self.
Reply
Old Aug 4, 2005 | 02:32 PM
  #7  
EJK20R's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2004
Posts: 380
Likes: 0
From: Irvine, Ca, OC
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (JDMCrx89)

bump up for more feedback's
Reply
Old Aug 5, 2005 | 04:12 PM
  #8  
EJK20R's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2004
Posts: 380
Likes: 0
From: Irvine, Ca, OC
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (EJK20R)

bump this up up and away
Reply
Old Aug 5, 2005 | 04:21 PM
  #9  
ONISHIMA's Avatar
Honda-Tech Member
 
Joined: Nov 2004
Posts: 116
Likes: 0
From: PHX, AZ
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (EJK20R)

i have the same problem still... i would think that my problem might me my iacv
i cleaned my TB so i guess its my IACV(idle air control valves).. bump bump...
i still dont understand why it doing thats it was working fine before? so i bump again!!
Reply
Old Aug 5, 2005 | 07:32 PM
  #10  
EJK20R's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2004
Posts: 380
Likes: 0
From: Irvine, Ca, OC
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (ONISHIMA)

up up and all the way up
Reply
Old Aug 5, 2005 | 08:19 PM
  #11  
SHystrdyGSRtdy's Avatar
Honda-Tech Member
 
Joined: Aug 2001
Posts: 4,451
Likes: 0
From: 909, Ca, US
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (EJK20R)

have you checked all of the suggested things?
Reply
Old Aug 6, 2005 | 12:55 PM
  #12  
EJK20R's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2004
Posts: 380
Likes: 0
From: Irvine, Ca, OC
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (SHystrdyGSRtdy)

tututu
Reply
Old Aug 6, 2005 | 04:54 PM
  #13  
fishhead's Avatar
 
Joined: Aug 2005
Posts: 56
Likes: 0
From: payson area, az, usa
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (EJK20R)

had the same thing and after hours of searching i found this and posted it on TI FITV take it off of your TB and screw in the white plastic part and it will be fixed
ALA KAZAM!!
http://www.team-integra.net/fo...earch
Reply
Old Aug 6, 2005 | 05:09 PM
  #14  
ONISHIMA's Avatar
Honda-Tech Member
 
Joined: Nov 2004
Posts: 116
Likes: 0
From: PHX, AZ
Default Re: GSR IDLE PROBLEM PLEASE HELP ! (fishhead)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fishhead &raquo;</TD></TR><TR><TD CLASS="quote">had the same thing and after hours of searching i found this and posted it on TI FITV take it off of your TB and screw in the white plastic part and it will be fixed
ALA KAZAM!!
http://www.team-integra.net/fo...earch</TD></TR></TABLE>
THANX AGAIN!! A++++ hopefully ppl wont ask this down the road
Reply
Old Aug 6, 2005 | 05:11 PM
  #15  
fishhead's Avatar
 
Joined: Aug 2005
Posts: 56
Likes: 0
From: payson area, az, usa
Default

i do not have permission to use the IM feature yet so good luck
reply if you fix the prob and tell what yours was
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
andysila
Tech / Misc
1
Apr 4, 2006 06:46 AM
2000civicsi
Honda Civic / Del Sol (1992 - 2000)
10
Oct 26, 2005 04:05 PM




All times are GMT -8. The time now is 11:12 PM.