Oil feed source????
Thread Starter
Member
Joined: Apr 2002
Posts: 3,223
Likes: 0
From: Los Angeles, CA
Oil feed source????
I know the most common source for the oil feed line is from the back of the block, but I've heard from a few people that it's also possible to tap it from the front of the block by the cam seal near the VTEC solonoid? (Only on a B-series motor) Is this a reliable source for the feed? Is there enough pressure to push the oil through? Is it too much pressure?
Thanks in advance.
Thanks in advance.
Member
Joined: Jun 2001
Posts: 2,888
Likes: 0
From: Dothan, AL
Re: Oil feed source???? (TheIntegraGuy)
like here?
https://honda-tech.com/zerothread?id=639633
IMO Either use a GE/greddy plate or t-off the oil pressure sending unit.
https://honda-tech.com/zerothread?id=639633
IMO Either use a GE/greddy plate or t-off the oil pressure sending unit.
Thread
Thread Starter
Forum
Replies
Last Post
totsie7944
Forced Induction
5
May 1, 2008 04:52 AM
ceemarun
Forced Induction
9
Aug 1, 2002 08:55 AM