where is the bleeder valve on an H22, and what is the process i need to follow to bleed the clutch.

 

dude, its right there on the slave cylinder. just bleed it like anything else - keep running fluid through the system until no air bubbles come out.

 

To be much more clear, it is mounted on the slave cylinder which is towards the front of the car on the tranny housing.

To bleed:
1)fill resevoir with fluid
2) open bleeder valve
3)depress clutch
4)close bleeder valve
5)let the clutch back up
6)repeat while keeping resevoir filled

 

Bleed, bleed and keep bleeding till ur blue in the face

I need to bleed my hatch

 

i know what to do now and everything but the screw wont budge. im turning it counterclockwise and put WD40 on it but it wont move at all

a socket wrench wont fit down there and im afraid im gonna strip it.

 

yea I guess I was a little vague. I just figured that its kind of a no brainer. but I guess everyone has to start somewhere.

 

i understand what to do i just cant get the damn screw off now.

 

just slip a wrench over it (8mm I think) and put some muscle into it, these things can be stubborn.